Redline will not change with Crome.
Thread Starter
Honda-Tech Member
Joined: Sep 2006
Posts: 90
Likes: 0
From: Layton, UT
Redline will not change with Crome.
Sup guys, I have a P06 ecu that is socketed using a moates ostrich running crome.
No matter what I set the redline to, it stays at about 7200rpm. The redline, FTS, and launch control settings are all set to the same value.
Any ideas? I just put this motor together and just got it running. So I can't tell by sound if it really is hitting the 8900rpm limiter and the tach is just wrong or what.
But it has a 2000 ITR tranny in it and rpm is at 3k at 60 mph. Which seems about right no?
No matter what I set the redline to, it stays at about 7200rpm. The redline, FTS, and launch control settings are all set to the same value.
Any ideas? I just put this motor together and just got it running. So I can't tell by sound if it really is hitting the 8900rpm limiter and the tach is just wrong or what.
But it has a 2000 ITR tranny in it and rpm is at 3k at 60 mph. Which seems about right no?
Thread
Thread Starter
Forum
Replies
Last Post