Picked up a harness, guy said that all he cut were the injectors off, but i noticed upon getting home and actually getting to work, that he hacked a little more that what he said, and I can't for the life of me think of what goes here, Im a little rusty , so im turning to you guys for help!! What goes at the end of the harness after the injectors towords the driver side?!? This little **** has me stumped and may prevent me from going to TX2k13!

 

Wait. This is what you bought or is this what you're trying to connect to the rest of the harness?

 

it looks to be the evap control ( sensor mounted on fuel rail)

what color are the wires??

 

I bought the harness like this, all i did was wire in my obd1 injector clips, and i cant think what goes on that end, I'll have to check for sure what the colors are when I get to the shop after work, I'm pretty irritated about it lol

 

im 99 % sure thats what it is i have a few em1 harnesses lying around give me a few

 

Thanks for the help broski!

 

no prob

 

no prob

 

yea look like its the evap solonoid if the wires are red/yel stripe & blk/yel stripe thats what it is

 

Cool, ill check that when i get to the shop after work!