So I have been getting frustrated with the timing belt I've lined
up everything but then when I put everything back together and start the
car I hear a whining from the timing area like as if its not tight enough or it's pushing up against the valve cover

I don't know what it is or what to do I need help please and thank you

 

belt too tight? tensioner worn?

 

I think I'm just going to swap for a manual tensioner

 

Usually a timing belt whining is a sign of being too tight

 

didn't seem like the belt was tight there was still some play, so really the only belts that had no play was balance belt and serpentine belt

 

my **** did the same thing for like the first 1000 miles then it went away just change the the manual tensioner, the belt needs to stretch a little give it time

 

if the balancer belt had no play, it might be too tight cause the bearing to whine

 

Yes this is the way. Its turns out to be easy to convert it. It looks complicated from pictures until you actually does it.

 

Ok sounds good thanks everyone Ill try to loosen the balance belt a little a see what happens

 

you may have to replace one of the beaings/pulleys as the tight belt may have stressed it

 

what type of bearing and is it pretty easy to get to

 

its more when I brake btw is when I hear a noise