Shifter problem
Thread Starter
Honda-Tech Member
Joined: Dec 2011
Posts: 37
Likes: 0
Shifter problem
I recently just did a b16a swap and a auto to manual conversion on my car.
Got a s4c b18 tranny and the shifter is "loose." Like I can move it side to side in any gear, and when I am in neutral, I can move it to the sides and such and it will stay there. Won't even pop back to the middle. Can anyone please explain this?
Got a s4c b18 tranny and the shifter is "loose." Like I can move it side to side in any gear, and when I am in neutral, I can move it to the sides and such and it will stay there. Won't even pop back to the middle. Can anyone please explain this?
Honda-Tech Member
Joined: Sep 2006
Posts: 388
Likes: 0
From: WI, USA
Re: Shifter problem
Install new shifter bushings and make sure that the linkage is properly installed at both the tranny and to the underside of the car. When i bought my EK the shifter was extremely loose so i installed new poly bushings and a short throw shifter at the same time. Made a world of difference.
Thread
Thread Starter
Forum
Replies
Last Post