Hey guys, got a question. So I just took my car out for a drive after installing a b16 head on my LS and it ran pretty good considering I'm just learning and researching as I go. I'm throwing 2 cels: 1) IAT sensor, forgot to relocate it oops! 2: TPS sensor, this is the one thats got me stumped. On my ls intake mani the sensor sat right on top and on the b16 intake mani there is no spot for it, just a vacuum port which I just hooked the vacuum line straight into. What should I do? Any help is appreciated Thx!!

 

Isn't their a spot for the TPS on the back of the b16 IM?

 

all thats on the back of the b16 im is the iac valve and a small vacuum port which i'm told by another member is just for cruise control.

 

TPS is throttle position sensor, I think you are referring to the MAP sensor. You may have the plugs swapped as they are the same connector:

 

dang, now im confused! i need to post a pic, the part that im talking about isnt either of those. its on the im itself on top close to tb but not on it. Now i need to find out why im throwing a tps code cuz the tb and alk sensors attached came straight off my ls im and didnt have any issues with them. weird

 

 

^^ that's the part I'm talkin about that was on ls im that has a vacuum line on it

 

This is the b16 im, I just put vacuum line straight on, and I'm a dope I didn't have the tps plugged back in! Duh! Lol

 

That EVAP purge, you won't need it if you are OBD1

 

Very nice! Thx for the help guys! Much appreciated!!