mid to high boost timing numbers???
Thread Starter
Honda-Tech Member
Joined: Oct 2008
Posts: 59
Likes: 1
From: parkersburg,wv / belpre,ohio, wv or oh, united states
i have a stock sleeve lsvtec, eagle rods, nippon cast pistons, b16 head, gsr cams, victor x, blox log manifold. holset turbo at 15 psi creeping to 15.9
my total timing is around 17.25-18.50 on high cam full boost. is this too high for it to last on 93 pump?
i tried it on 17 psi on sunoco 100 unleaded but turned it down for fear of blowing it up without water meth running yet
my total timing is around 17.25-18.50 on high cam full boost. is this too high for it to last on 93 pump?
i tried it on 17 psi on sunoco 100 unleaded but turned it down for fear of blowing it up without water meth running yet
i have a stock sleeve lsvtec, eagle rods, nippon cast pistons, b16 head, gsr cams, victor x, blox log manifold. holset turbo at 15 psi creeping to 15.9
my total timing is around 17.25-18.50 on high cam full boost. is this too high for it to last on 93 pump?
i tried it on 17 psi on sunoco 100 unleaded but turned it down for fear of blowing it up without water meth running yet
my total timing is around 17.25-18.50 on high cam full boost. is this too high for it to last on 93 pump?
i tried it on 17 psi on sunoco 100 unleaded but turned it down for fear of blowing it up without water meth running yet
i run my timing a little less than that at 16 psi, around 14-15 but every setup is different.
Impossible to answer correctly. Your suppose to stick the car on a dyno and ask it how much ignition timing it likes. Not tell it.... Every setup is different...
Thread
Thread Starter
Forum
Replies
Last Post
2x0
Engine Management and Tuning
10
Jul 1, 2017 01:56 PM
miro_gt
Forced Induction
8
Sep 19, 2005 02:17 PM







