HELP...pitting in cylinder wall
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Sep 2011
Posts: 277
Likes: 0
From: Bismarck ND
HELP...pitting in cylinder wall
Hey HT,
Just picked up a B18C to start my build and when i received it i noticed it had some pitting within one of the cylinder walls. Anyone know if this is to far gone or can it be repaired? I would appreciate any feedback.
Just picked up a B18C to start my build and when i received it i noticed it had some pitting within one of the cylinder walls. Anyone know if this is to far gone or can it be repaired? I would appreciate any feedback.
Honda-Tech Member
Joined: Mar 2009
Posts: 1,561
Likes: 1
From: Chicago SPLURGE, Il
Re: HELP...pitting in cylinder wall
have any measuring tools?
measure the bore of the non pitted surface and then the bore of the pitted hole,
if the block can be saved, it will 100% needed to be bored out, typically .030 or .060in over
measure the bore of the non pitted surface and then the bore of the pitted hole,
if the block can be saved, it will 100% needed to be bored out, typically .030 or .060in over
Thread
Thread Starter
Forum
Replies
Last Post
hmtcrxsir
Honda Civic / Del Sol (1992 - 2000)
6
Jun 19, 2009 09:21 PM
Leo.
Forced Induction
4
Dec 8, 2006 02:56 PM
bb_one
Tech / Misc
11
Apr 14, 2005 04:38 AM
