Is there a write up to bleed the abs on a 96 accord sedan?

 

Here are the directions I followed.

Fluid should not go down then back up. Itsounds like theres air in there. Try bleeding the ABS. Based on my former Integra, it should be about like this...

Bleed screw is probably near ABS fluid reservoir. Find a hose & a jar. Hose should fit good; if it pops off the pressure is high enough to be dangerous.

Run engine to pump up ABS. Shut off.

Crack open ABS bleed screw just barely, because the pressure is high.
As soon as it stops flowing, shut it again.

Run engine to pump ABS back up. Shut off engine. Refill reservoir.

Repeat until you dont get any more air bubbles from the bleed screw.

http://www.hondaaccordforum.com/foru...-accord-21933/