I decided its time to clean out and sell the stuff i have sitting around the house and let it go to someone that actually needs them so to start off mostly everything is OBO so don't b scared to throw an offer and the fastest way to get a hold of me is to txt u can pm but it might take longer then a txt so my # 301 four four two 6157



1) D-Series blue silicone rad. houses- $old
2) D-Series T-Bracket- $25
3) B-series Power steering pump- $50
4) B-Series Crank pulley - $50


5) SOHC stock axels- $50 both
6) SOHC Shift linkage- $50
7) D15B7 came out of my 95 eg cx motor has about 140-145k when i took it out it runs good has a head gasket leak on cylinder 4 if i remember right i replaced the head gasket and water pump and timing belt at problly 130-135k and installed arp head studs also and a y8 head gasket it smokes once in a while not all the time it was boosted for about 5k it also has a ex/si tranny and a stage 2 ebay clutch and flywheel things missing off the motor are the injectors dizzy and the oil pan not bolted but included will sell together for $500 OBO
will part the tranny for $200 including the clutch SOLD


8) EG Passanger air bag blue- $100
9) B-Series VTEC half way shaved valve cover with holes drilled for catch can- $old
10) D16 valve cover blue- $50
11) Bare Gsr intake mani- $75
12) Bare Ls intake mani- $50
13) Gsr black box thing- $25
14) Obd0 Rad. fan- $15
15) B-series Touque mount- $50
16) B-Series T bracket- $50
17) D-series T bracket- $25
18) 440 rc injectors with pig tails- $150
19) JDM GSR BLOCK - it was in my cousins hatch and he spun a rod bearing so he took it out and i put a jdm d15 in it. u can see from the picture its missing some stuff but manageable to get it running again looking for $old




20) OG Dc Sport b-series headers have some damage but still get the job done- $100 OBO





21) BRAND NEW!!!!!!! Bisimoto turbo d16z6 cam Level 2.4, Z6 Turbo Street/Race billet, vtec
"Top selling street/strip/race Turbo camshaft profile with slightly lopey idle, with emphasis up to 8400 rpms. Takes 7-10 business days to manufacture from billet. Cam gears, and our pro valve springs/retainers are highly recommended. 0.440″ valve lift on the intake and 0.430″ exh; 252 deg duration on intake and 233 deg exhaust at 0.040″ Optimized lobe separation. Destroys all other competitors turbo camshafts, with a 80whp+ improvement over stock at 20psi, and improved spooling characteristics!" $450
22) BRAND NEW!!!!!!! Bisimoto D16, D15, ZC sohc cam gear, each ('88-'95) Fits D16Z6, D16A6, D15B vtec, D15B, D15B1, D15B2, D15B7, and ZC SOHC. (Fits D16Y7, and D16Y8 with slight 4 deg retard adjustment upon install) $135
23) BRAND NEW!!!!!!! Bisimoto D16Z6 Spring and titanium retainer kit
Tested to 14,000 RPMs $365
24) Bistimoto licence plate cover $15 or free with any of the bisimoto parts

MOST OF THE STUFF IS OBO SO DONT BE SCARED TO SHOOT AN OFFER MORE STUFF WILL B ADDED 2MARROW WHEN I CAN FIND SOME MORE STUFF

 

Bump

 

bump more stuff this weekend

 

PM Sent

 

que pedo loco let me get some stuff

 

rad. hoses sold
trans pending

 

Bump

 

Bump

 

Trans sold

 

bump gsr pending

 

gsr sold

 

Bump adding more stuff later when I get home

 

bump need stuff sold

 

bump

 

Bump

 

Top

 

will u do 50 picked up for the header ??

 

or 100 picked up for valve cover and header lmk

 

b series valve cover sold but headers still available call or txt for fastest response

 

Bump