I just recently pulled my head and put it back together and got it tuned and made good power. but now it leaks alot from the head gasket (I think) next to the timing belt. the car still seems to run good, and compression is good, but it losses alot of oil. what could be the issue. thanks

 

are u sure is leaking directly from the HG? when you put the head back did u replaced VC gasket and cam seals?

 

I did not replace valve cover gasket or cam seals but there is no oil on the head. it only builds up on the deck of the block

 

i would try retorquing the head. see if that helps. what where your torque specs and did u reuse the same bolts or bought new ones?

 

I used Arp head studs and I torques them to 80 ft lbs

 

Did you recheck every stud when You finished torquing all of them?

 

yes I did. im thinking maybe the head is warped and should be milled.