if i do this to my valve cover



do i cut the rivets on the inside and take out the baffling

 

Is your engine boosted?

 

it will be i have two valve covers at the moment i dont have the money for the rest of the parts i need and the tune so im gonna break it in n/a and the boost it later in the mean time i want to take one of my valve covers and do that to it

 

From Google.
http://www.carolinahondas.com/instal...part-list.html

I'm sure there are more.

 

thank for the quick reply but what would happen if i did cut out baffling

 

If the DIYs you find don't indicate that you do, then why do it? Unless you screwed up and did just that.

 

no i didnt but i can get the stock breather tube out and it broke off almost flush with the valve cover thats why im asking about the baffling because i was thinking about knocking it out from the back

 

Why do people not list all the details in the first post?

Do not remove the baffling.

 

what details do you need to know its going to be boosted im shooting for like 18-20psi

 

I would have preferred you say what you had done in the first post instead of the seventh. It would have saved some time.

Do not remove the baffling unless you can reinstall it.

 

alright thank you sir and i apologize for the delayed info