Honda Civic / Del Sol (1992 - 2000) EG/EH/EJ/EK/EM1 Discussion

scrapping sound when shifting 1-2-3, and wheel rattle

Thread Tools
 
Search this Thread
 
Old May 27, 2011 | 11:26 PM
  #1  
vincam's Avatar
Thread Starter
Trial User
 
Joined: May 2011
Posts: 8
Likes: 0
Default scrapping sound when shifting 1-2-3, and wheel rattle

the car is a 94 honda civic lx 4door-sedan non-vtec


when i shift between first secound and third, i get scrapping sounds when about to shift up/down, also if i release the accelerator while in gear on these 3 it will scrape, im guessing its the clutch, but im a noob with cars, can anyone confirm this for me? and could you give me a suggestion for a good clutch kit (i dont need a 300 dollar kit) but not too expensive please.


also, i noticed when im going slow-ish i get some rattling noise coming from the rear-right wheel, so i propped it up to check it out, seemed normal, so i pulled the handbrake, and sure enough, the left tire had no play, was completely firm, the right one had play forward and backwards (no sideways play). what would this be? i have no clue but im guessing it has something to do with it

and one more thing, im thinking of getting a paintjob for my car, its pretty bad, a nearby mechanic shop told me about 450 for a job that will last me a 3-4 years (my car is white, i want to paint it black). but i read on the forum and most people talk about maaco, should i look into that?

thanks for all the help people! i am new to this, (my first car) so go easy on the jargon please! (also if the only thing you have to say is how this is a **** car or w/e you are not helping and are not invited to share your elitist point of view)


thanks in advance!
Reply
Old May 28, 2011 | 09:26 AM
  #2  
vincam's Avatar
Thread Starter
Trial User
 
Joined: May 2011
Posts: 8
Likes: 0
Default Re: scrapping sound when shifting 1-2-3, and wheel rattle

need help with this please!
Reply
Old May 28, 2011 | 09:29 AM
  #3  
grumblemarc's Avatar
The Grumpiest
iTrader: (4)
 
Joined: May 2008
Posts: 28,333
Likes: 24
From: Oak Ridge, TN, USA
Default Re: scrapping sound when shifting 1-2-3, and wheel rattle

Let the nearby mechanic look at it. Much better than asking strangers on a forum.
Reply
Old May 28, 2011 | 07:42 PM
  #4  
Red_Army's Avatar
Honda-Tech Member
 
Joined: Sep 2008
Posts: 2,039
Likes: 0
From: nowhere ville.
Default Re: scrapping sound when shifting 1-2-3, and wheel rattle

mechanic.
the shifting might be it hitting the exhaust but thats usually from a modification done.

also for the most part maaco sucks.
Reply
Old May 28, 2011 | 07:58 PM
  #5  
wisco123's Avatar
Trial User
 
Joined: May 2011
Posts: 3
Likes: 0
Default Re: scrapping sound when shifting 1-2-3, and wheel rattle

good luck getting a really cheap clutch kit, there expensive
Reply
Old May 29, 2011 | 04:18 AM
  #6  
grumblemarc's Avatar
The Grumpiest
iTrader: (4)
 
Joined: May 2008
Posts: 28,333
Likes: 24
From: Oak Ridge, TN, USA
Default Re: scrapping sound when shifting 1-2-3, and wheel rattle

Jack up the car and have a friend shift through the gears while you inspect from underneath.
Reply
Old May 29, 2011 | 12:08 PM
  #7  
vincam's Avatar
Thread Starter
Trial User
 
Joined: May 2011
Posts: 8
Likes: 0
Default Re: scrapping sound when shifting 1-2-3, and wheel rattle

wow. so far as i have seen, this server seems to be made up of 90% opiniated people, 10% people who know what they are talking about.

i ask what those things could be, and 3 people say mechanic. thanks captain obvious you have been a great help!
and one guy says clutch kits are expensive wtf 100-200 bucks is not expensive for a clutck kit.

thanks for the 1 answer that seems to be actually related to the question though
Reply
Old May 29, 2011 | 12:12 PM
  #8  
grumblemarc's Avatar
The Grumpiest
iTrader: (4)
 
Joined: May 2008
Posts: 28,333
Likes: 24
From: Oak Ridge, TN, USA
Default Re: scrapping sound when shifting 1-2-3, and wheel rattle

Good luck getting further help with that attitude. This is a public forum. Be prepared to get all kinds of answers. Especially if you know nothing about cars.
You have a mechanic at your disposal but you are asking for unqualified advice from people on a forum. Maybe he only does paint jobs.
Reply
Old May 30, 2011 | 07:24 PM
  #9  
Red_Army's Avatar
Honda-Tech Member
 
Joined: Sep 2008
Posts: 2,039
Likes: 0
From: nowhere ville.
Default Re: scrapping sound when shifting 1-2-3, and wheel rattle

you ever wonder why they don't have a mechanic via phone?

because unless your there. there is NO way of telling whats wrong with your car.
so mechanic. thats what i'd do if i wasn't mechanically inclined. duh.

if you see 1-200 bucks as not expensive how is 300 breaking the bank?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CO671
Honda Civic / Del Sol (1992 - 2000)
5
Jul 30, 2012 05:32 AM
teamvirus
Honda Civic / Del Sol (1992 - 2000)
9
Apr 25, 2009 11:18 AM
vdawg559
Honda Civic / Del Sol (1992 - 2000)
15
May 24, 2008 08:16 AM
needanew1
Honda Civic / Del Sol (1992 - 2000)
4
Apr 2, 2008 01:35 PM




All times are GMT -8. The time now is 05:53 PM.