ok i got to run my car today!!! here is all the info
94 civic CX hatch
94 h22a
all stock besides custom exhaust and stock intake tube with cone filter
ACT clutch/JUN flywheel W/LSD
2280 LBS with full interior minus back seat/spare, FULL NOS bottle and over 1/2 tank of gas
best run of the day was a 13.655@100.40 MPH
1.9 60 foot, 8.7 1/8 on 20x8x14 M/t slicks(my first run ever with slicks)
i think i could do better if i had more practice?
best on streets was a 13.9 @99 with a 2.1 60 foot
it was about 60 degrees? this was in boise idaho, about 3000 ft above sea level
is that slick size ok for my setup?
i tried spraying a NOS 50 shot but every run i did with it i fucked up, mostly missing 3rd gear(took me 5 trys to get it in) then i got it in but them went from 4th to 2nd(got it out QUICK didnt hurt anything)
so i said **** it and turned the bottle off

 

Slicks are too small. Try running 22x8x13's.

 

i too would also recommen bigger slicks!!

 

MAN...

I KNOW I posted a reply in this thread.....why do my posts keep dissapearing?

I posted that your time would be like a 13.1 at sea level

 

yea, i posted in the EG forum to, thats where you replied
my bad

 

whats the elev. correction for where your at

here in FL my friend has a H22 that runs 13.3 all day with nothing more than a intake and open header

 

all i have is a clutch/flywheel and exhaust really, plus im 90% full interior

 

his run would have been a 13.1@104.2 mph

 

i wish it was a 13.1 up here

 

nice time tim. looks like you had a busy weekend.......still having problems with the secondaries?


i wish i could have made the canyon run. my lil D16 probably couldnt have made it anyway....lol

 

not to shabby for first time on slicks, i think if you ran open header and kept those tires at 13psi, you could have easily hit 13.3 with the same setup.. you felt how good those tires hooked up. i agree that if you ran the bottle all the time that bigger slicks would be necessary but for the setup you have now those slicks worked awesome.. you know you were there.. and dont stress it if you decide not to get them i have another buyer.. later see you next time..

 

yea i cant figure out how to get those damn things to work right, owell im happy with a 13.6 i know i could of done better so im not worried