my H22a civic 1/4 mile times
09-29-2002, 09:56 PM
#1
New User
Thread Starter
Join Date: Sep 2001
Location: Logan, UT
Posts: 2,506
Likes: 0
Received 0 Likes
on
0 Posts
my H22a civic 1/4 mile times
ok i got to run my car today!!! here is all the info
94 civic CX hatch
94 h22a
all stock besides custom exhaust and stock intake tube with cone filter
ACT clutch/JUN flywheel W/LSD
2280 LBS with full interior minus back seat/spare, FULL NOS bottle and over 1/2 tank of gas
best run of the day was a 13.655@100.40 MPH
1.9 60 foot, 8.7 1/8 on 20x8x14 M/t slicks(my first run ever with slicks)
i think i could do better if i had more practice?
best on streets was a 13.9 @99 with a 2.1 60 foot
it was about 60 degrees? this was in boise idaho, about 3000 ft above sea level
is that slick size ok for my setup?
i tried spraying a NOS 50 shot but every run i did with it i fucked up, mostly missing 3rd gear(took me 5 trys to get it in) then i got it in but them went from 4th to 2nd(got it out QUICK didnt hurt anything)
so i said **** it and turned the bottle off
94 civic CX hatch
94 h22a
all stock besides custom exhaust and stock intake tube with cone filter
ACT clutch/JUN flywheel W/LSD
2280 LBS with full interior minus back seat/spare, FULL NOS bottle and over 1/2 tank of gas
best run of the day was a 13.655@100.40 MPH
1.9 60 foot, 8.7 1/8 on 20x8x14 M/t slicks(my first run ever with slicks)
i think i could do better if i had more practice?
best on streets was a 13.9 @99 with a 2.1 60 foot
it was about 60 degrees? this was in boise idaho, about 3000 ft above sea level
is that slick size ok for my setup?
i tried spraying a NOS 50 shot but every run i did with it i fucked up, mostly missing 3rd gear(took me 5 trys to get it in) then i got it in but them went from 4th to 2nd(got it out QUICK didnt hurt anything)
so i said **** it and turned the bottle off
09-29-2002, 10:59 PM
#3
Junior Member
Join Date: May 2002
Location: The OC
Posts: 974
Likes: 0
Received 0 Likes
on
0 Posts
Re: my H22a civic 1/4 mile times (hot_EG)
Those are not too bad of times. A 13.9 with a 2.1 60' time with street tires is pretty good. What street tires/rims were you running?
[Modified by laugHin22CX, 8:00 AM 9/30/2002]
[Modified by laugHin22CX, 8:00 AM 9/30/2002]
09-29-2002, 11:00 PM
#4
Honda-Tech Member
Join Date: Feb 2001
Location: Mountain View
Posts: 3,775
Likes: 0
Received 0 Likes
on
0 Posts
Re: my H22a civic 1/4 mile times (H22a-CX)
yea more practice makes a big difference. I know some dude with a H22a CX hatch (i/h/e/slicks) and he runs 12.6 @ 100 somthing. you should be right up there.
09-30-2002, 06:58 AM
#7
Join Date: Sep 2002
Location: This is the Vtec Monster from, HELL, U.S.A
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
Re: my H22a civic 1/4 mile times (H22a-CX)
i would have to say you have more in it too! i ran on bald p185/60r14, real bald, a 14.1 at 100.89, with a very bad 2.45 60 foot. with those tires i can only luanch at about 2200rpm w/out spinning them (both tires) down the track. i have an intake, exhaust, and itr tranny. 
Trending Topics
09-30-2002, 07:16 AM
#8
Join Date: Sep 2002
Location: focked up, NJ, 08043
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Re: my H22a civic 1/4 mile times (mattcxb18)
nicee 
what other mods do yoo plan on doing tho? with a h22 yoo shood be able to run 12.6's with some practice n minor mods good luck
what other mods do yoo plan on doing tho? with a h22 yoo shood be able to run 12.6's with some practice n minor mods good luck
09-30-2002, 09:19 AM
#10
Join Date: Sep 2002
Location: rurouni, WA, japan
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Re: my H22a civic 1/4 mile times (H22a-CX)
practice? but your 60fts are pretty good, so id say you got your launch pretty good, hmm your shifts? or maybe you just need a tuneup? dont know >.<
09-30-2002, 12:36 PM
#11
New User
Thread Starter
Join Date: Sep 2001
Location: Logan, UT
Posts: 2,506
Likes: 0
Received 0 Likes
on
0 Posts
Re: my H22a civic 1/4 mile times (AmakakeruRyuNoHirameki)
the 13.6 was all motor no nitrous, i never gota a good run on the spray
i was using kumho tires when i got the 2.1(not the 712's)
im gonna go back up end of the month se if i can break 12's all motor, i need to get a header, intake, gut the car and some little tunning
i know id run alot better at a lower elevation, i think i could of pulled a 13.4 or .5 if i had a few more runs, it was my first time with slicks
just to let you know a 96+ hatch just as gutted as me with a b18c5 swap, with I/H/E with BFG drag radials was only running in the lower 14's, high elevaton SUCKS
i was using kumho tires when i got the 2.1(not the 712's)
im gonna go back up end of the month se if i can break 12's all motor, i need to get a header, intake, gut the car and some little tunning
i know id run alot better at a lower elevation, i think i could of pulled a 13.4 or .5 if i had a few more runs, it was my first time with slicks
just to let you know a 96+ hatch just as gutted as me with a b18c5 swap, with I/H/E with BFG drag radials was only running in the lower 14's, high elevaton SUCKS
09-30-2002, 02:13 PM
#14
New User
Thread Starter
Join Date: Sep 2001
Location: Logan, UT
Posts: 2,506
Likes: 0
Received 0 Likes
on
0 Posts
Re: my H22a civic 1/4 mile times (Breakdancer)
the kumho's i was using are damn god!! better than my falken azenis's
i only launched at like 6k and i didnt heat the slicks up much, i think i can do better
i only launched at like 6k and i didnt heat the slicks up much, i think i can do better
09-30-2002, 02:17 PM
#15
Honda-Tech Member
Join Date: Aug 2002
Location: killadelphia, PA, FBGDD
Posts: 1,654
Likes: 0
Received 0 Likes
on
0 Posts
Re: my H22a civic 1/4 mile times (H22a-CX)
h22 civics are damn hot. i should know..i'm selling one right now in classifieds! check it out! haha..i just had to put that in..nobody wants it. oh well. those are pretty good 0-60' u got there.
09-30-2002, 05:57 PM
#18
Join Date: Apr 2001
Location: Northwest Tri Cities Kennewick, WA, USA
Posts: 2,090
Likes: 0
Received 0 Likes
on
0 Posts
Re: my H22a civic 1/4 mile times (dmotoguy)
Boise huh? Look out for my friends Viper blue '74 260z, he just moved to Boise 3 weeks ago! It is a 260z that we put a 280zx turbo motor into, puts down 262hp and 312 lb/ft to the wheels! He works at Zumiez if you ever wanna see the car! Congrats on your times by the way I hope for amazing results with my h22 cx as well,... IF my motor will ever get done at the machine shop!!!
09-30-2002, 07:32 PM
#20
Honda-Tech Member
Join Date: Mar 2002
Location: japizona
Posts: 2,780
Likes: 0
Received 0 Likes
on
0 Posts
Re: my H22a civic 1/4 mile times (Downeybear11)
yea more practice makes a big difference. I know some dude with a H22a CX hatch (i/h/e/slicks) and he runs 12.6 @ 100 somthing. you should be right up there.
09-30-2002, 07:50 PM
#21
Honda-Tech Member
Join Date: Jan 2002
Location: DFW, TX
Posts: 3,038
Likes: 0
Received 0 Likes
on
0 Posts
Re: my H22a civic 1/4 mile times (hot_EG)
Whatever Dallas' sea level is.
ha..what is the elevation in Dallas?
I really have no clue
ha..what is the elevation in Dallas?
I really have no clue
09-30-2002, 09:38 PM
#23
Honda-Tech Member
Join Date: Jan 2002
Location: DFW, TX
Posts: 3,038
Likes: 0
Received 0 Likes
on
0 Posts
Re: my H22a civic 1/4 mile times (hot_EG)
Don't know about Dallas, but Ennis is 600ft above sea level.
eh, well yah....that'll work.
eh, well yah....that'll work.
10-01-2002, 08:26 AM
#24
New User
Thread Starter
Join Date: Sep 2001
Location: Logan, UT
Posts: 2,506
Likes: 0
Received 0 Likes
on
0 Posts
Re: my H22a civic 1/4 mile times (97hb)
hey c5 -allmotor-
why do you say who taught you how to drive? like i said it was my first time with slicks, i thought a 1.9 60 foot was pretty good- im selling the NOS kit so im not worried about that, ill get some better times soon
why do you say who taught you how to drive? like i said it was my first time with slicks, i thought a 1.9 60 foot was pretty good- im selling the NOS kit so im not worried about that, ill get some better times soon
