is 1/4" diameter too big...
Honda-Tech Member
Joined: Dec 2001
Posts: 1,568
Likes: 0
From: Filthadelphia Area, PA, USA
Re: is 1/4" diameter too big... (AbaZ)
FYI to find the equivalent -an size you put the number in front of the an over 16 to find inches.
i.e.
-3an = 3/16
-4an= 4/16=1/4
-6an= 6/16=3/8
and so on
i.e.
-3an = 3/16
-4an= 4/16=1/4
-6an= 6/16=3/8
and so on
Honda-Tech Member
Joined: Oct 2001
Posts: 2,785
Likes: 0
From: So Cal
Re: is 1/4" diameter too big... (racerxadam)
FYI to find the equivalent -an size you put the number in front of the an over 16 to find inches.
i.e.
-3an = 3/16
-4an= 4/16=1/4
-6an= 6/16=3/8
and so on
i.e.
-3an = 3/16
-4an= 4/16=1/4
-6an= 6/16=3/8
and so on
What is this crap?
Joined: May 2001
Posts: 23,180
Likes: 57
From: Minneapolis, MN
Re: is 1/4" diameter too big... (racerxadam)
FYI to find the equivalent -an size you put the number in front of the an over 16 to find inches.
i.e.
-3an = 3/16
-4an= 4/16=1/4
-6an= 6/16=3/8
and so on
i.e.
-3an = 3/16
-4an= 4/16=1/4
-6an= 6/16=3/8
and so on
Trending Topics
Honda-Tech Member
Joined: Mar 2002
Posts: 2,302
Likes: 1
From: Calgary, AB, Canada
Re: is 1/4" diameter too big... (falconGSR)
Good info! I am going to wield the end of my -4an to 1/8 npt adapter that screws into my turbo and drill the hole to 3/16" so I don't have to buy new earls -3 lines and crap.
Thread
Thread Starter
Forum
Replies
Last Post