im currently running a b16 in my integra (bought it this way) and it has a ls dizzy, i feel like my vtec doesnt rip like it should and that my car goes absolutely nowhere compared to other b16s ive driven, could this be a big part of that?

 

you need a b16a or b18c vtec disstributore so your vtec can engage. It feels like your vtec goes no where since its not activating.
you might want to check what ecu your running and if your vtec wires are all hooked up correctly.

 

this is the same problem i am to facing the best solution please

 

how can you even feel vtec kick in? that dizzy wont even activate. you need a b series vtec dizzy, and make sure everything is hooked up.

 

4sure. Yea I'm pretty sure the LS distributor will not engage VTEC. You will need a VTEC distributor.

 

I believe there is no difference between a vtec and non vtec dizzy besides the mounting arms. Ive ran a non v dizzy b4 and it seemed completely normal. Vtec crossover was the same as the vtec dizzy. I would look for other problems.

 

its all the same ls dizzy and vtec dizzy. like said the arms that mount are a bit diff, and yes ur vtec wont kick hard yo! if you dont fill up on vtec fuel!