i have a integra gsr 95' and i think ther is something wrong with my abs..
everytime i start my car ther is a loud sound coming from my abs module andthe sound last for at least 2mins durning that 2mins...wenever i step on the brake pedal the sound becomes louder and i can feel the brake pedal becomes very stiff...after the 2mins my abs light comes on.
any ideas how to fix it?

 

pull the codes from the module

 

Do any brake work recently? I agree, pull the codes is the right first step.

I ask about brake work because air in the system can do this... as one example.

Given your description, one code may be ABS motor over run - which means it runs until timeout without reaching pressure; air in the system would be one cause of many (potentially).

Good luck

 

i actually bought the car last summer and i havent did a brake change or anything since my brake pads still have alot of meat. how would i fix the problem? do i just bleed out the brake fluid?

 

Well, first, I'd get the codes. Really.

But on that ABS it's fairly easy to bleed. Have you checked the fluid level?

 

how do i get the codes? lol
i will check that asap

 

On the thread page for integras, at the top there is a how to thread dealing with ecu and abs lights, and how to pull codes. Good luck.

 

mine was doing the same thing, it was like a loud buzzing noise coming from the passenger side of my gsr, i just pullled the black tab off of the white abs box, pulled out the plastic top and topped it off with brake fluid and it stopped

 

hot dog! it worked my abs doesnt make the sound anymore and abs light is off haha

 

question is though; why was it low?

 

i dnt have a clue....when i bought the car it was basically sitting there. the previous owner didnt drive it for a while and i basically renew everything.

 

I think this is pretty common with the abs systems. I'm sure your fluid was low and it probably has a mild leak. Not really a big deal considering the price of the part is much greater than the actual, relatively small, problem.

 

How do u bleed the abs module? Its my first teg with abs and I saw the abs module has a bleed valve....how do u bleed it?