KS FS: 92 Nissan 240sx w/ built 12 sec KA24DE-T and 90 parts car
Price:
5000 firm for the full lot or 4500 for motor alone
Engine:
KA24DE-T
Eagle rods
CP pistons 9.1:1
ACL bearings
ARP studs
Cometic headgasket
S13 exhaust cam
S14 intake cam
gutted s13/s14 hybrid IM
custom top mount turbo manifold
T3 super 60 turbo
Tial 40mm wastegate
Fuel rail (not sure on brand)
Aeromotive FPR
1000cc injectors
3" DP
Valve cover fitted for -10 an fitting and steel braided line to catch can
FMIC custom piping w/ Greddy Type S bov
Precision FMIC large core
NGK Plug wires
NGK Plugs
Competition Clutch pressure plate/ 6-puck/ flywheel
AEM EMS completely tuned for this setup
Solid motor mounts
I am sure I am missing something, but this gives you an idea, This setup was driven to break in, has had maybe 12-15 passes down the track, best time was a 12.7, car is tuned currently for 10lbs, will include multiple other tunes along with this. All fluids are changed after every event gone to, and oil changes outside of these events, just normal driving, every 1000... Royal purple and Eneos for engine and Redline for tranny. This setup maybe has 8-10k on it still lots of life left and much more abuse to be thrown at it. Many people can vouche for this motor/turbo setup. Any questions on it, if you have the cash in hand that is, please feel free to contact me with any question or concern you have @ (316) 516-1131 for purchase info, will report any spam.
If interested, I will sell the shell it is sitting in (red 92) and have another shell (multicolored 90) you can use for parts to put this car back together, as I have already parted a majority of the red shell out.
The 92 still has tien tie rods, solid subframe mounts, full energy suspension bushing kit installed, custom made 3" straight exhaust with apexi N1 muffler
NOTE: the other car is to only be used for parts and is not rebuildable, both cars have clean titles
Price to start for motor only: 4500
5000 firm for the full lot or 4500 for motor alone
Engine:
KA24DE-T
Eagle rods
CP pistons 9.1:1
ACL bearings
ARP studs
Cometic headgasket
S13 exhaust cam
S14 intake cam
gutted s13/s14 hybrid IM
custom top mount turbo manifold
T3 super 60 turbo
Tial 40mm wastegate
Fuel rail (not sure on brand)
Aeromotive FPR
1000cc injectors
3" DP
Valve cover fitted for -10 an fitting and steel braided line to catch can
FMIC custom piping w/ Greddy Type S bov
Precision FMIC large core
NGK Plug wires
NGK Plugs
Competition Clutch pressure plate/ 6-puck/ flywheel
AEM EMS completely tuned for this setup
Solid motor mounts
I am sure I am missing something, but this gives you an idea, This setup was driven to break in, has had maybe 12-15 passes down the track, best time was a 12.7, car is tuned currently for 10lbs, will include multiple other tunes along with this. All fluids are changed after every event gone to, and oil changes outside of these events, just normal driving, every 1000... Royal purple and Eneos for engine and Redline for tranny. This setup maybe has 8-10k on it still lots of life left and much more abuse to be thrown at it. Many people can vouche for this motor/turbo setup. Any questions on it, if you have the cash in hand that is, please feel free to contact me with any question or concern you have @ (316) 516-1131 for purchase info, will report any spam.
If interested, I will sell the shell it is sitting in (red 92) and have another shell (multicolored 90) you can use for parts to put this car back together, as I have already parted a majority of the red shell out.
The 92 still has tien tie rods, solid subframe mounts, full energy suspension bushing kit installed, custom made 3" straight exhaust with apexi N1 muffler
NOTE: the other car is to only be used for parts and is not rebuildable, both cars have clean titles
Price to start for motor only: 4500
5000 and about 2 hours of your time to have one fun car and another shell to part out and make some of your money back on. Cheap cheap cheap! He'll there is more than 5000 in the motor/management alone
Trending Topics
You need to post a VIN, as well as the mileage, please.
http://www.hondamarketplace.com/show....php?t=2617062
Thanks
http://www.hondamarketplace.com/show....php?t=2617062
1. A VIN must be furnished for every vehicle for sale!!!
3. Mileage of vehicle must also be included.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post



bump for view, GLWS

