What needs to be removed to pull b18b1 auto engine
Thread Starter
Honda-Tech Member
Joined: May 2010
Posts: 6
Likes: 0
What needs to be removed to pull b18b1 auto engine
Wondering what needs to be unbolted/removed to pull a b18b1 engine, its an automatic from a 2000 integra.. Does the tranny need to come out with it? Hood need to come off? Any help would be great thanks!
Honda-Tech Member
Joined: May 2009
Posts: 1,102
Likes: 0
From: Saint Paul, Minnesota
Re: What needs to be removed to pull b18b1 auto engine
PULL EVERYTHING!!!! If it looks like it needs to be pulled, pull it. LOL, jk.....I will tell you how to do it with words the best I can. BEAR WITH ME.
TOOLS:
main tools are:
3/8 rachet
1/2 rachet
standard screwdriver AKA flat
hammer
5/16 or 3/8 punch
3" and 6" extension(LOL)
10mm socket and wrench
12mm socket and wrench
14mm socket and wrench
17mm socket and wrench
other sockets as well because sometimes someone will cut a corner and place another size nut/bolt here and there.
32mm axle nut
needle nose pliers
breaker bar 1/2 drive
car jack and jack stands
SHOPE TOWELS
TIME
****, I just seen it was an automatic....
TOOLS:
main tools are:
3/8 rachet
1/2 rachet
standard screwdriver AKA flat
hammer
5/16 or 3/8 punch
3" and 6" extension(LOL)
10mm socket and wrench
12mm socket and wrench
14mm socket and wrench
17mm socket and wrench
other sockets as well because sometimes someone will cut a corner and place another size nut/bolt here and there.
32mm axle nut
needle nose pliers
breaker bar 1/2 drive
car jack and jack stands
SHOPE TOWELS
TIME
****, I just seen it was an automatic....
Thread
Thread Starter
Forum
Replies
Last Post
