HI guys i was just wondering on a couple of questions for my project build for this winter. Originally i was going to turbo my 00 accord and started getiing turbo parts for it. but now i got my hands on a h22 head and all it needs are new valve guides. so i was planning since its all apart i should build the h22 head and rebuild the f23 block. but my question is before i start doing all this would i see a big improvements and how much could i push the psi of the motor if it was tuned right on a hondata s300? Ohh my goal is to run e85 and be able to maybe push 400hp. i seen all the g builds on the forums but i have not seen any one push it with built internals.

this is what i already have
-wastegate
-.57 t3/t4 turbo
-bov
-f23 ramhorn manifold( i know it wont work with the h22 head)

buts here my plan
- skunk2 dual springs
- skunk2 forge valves
- skunk2 titanium retainers
- skunk2 tuner turbo camshafts
- skunk2 cam gears
- cp forge pistons ( unsure what compression to get)
- crower billet rods
- hp ACL bearings.

with this would it make some power or what else should i do? thanks

 

any one ?