Need to adjust my valves on a 1995 honda, anyone know the proper clearance. Cound not find vici on the hood. Anyone?
laloquera916

 

Anyone?

 

15b7 engine.

 

For a D15B7 the Valve stem to guide clearance is as follows

Intake 0.001 to 0.002 inch/ Service Intake maximum is 0.003

Exhaust is 0.0002 to 0.003 inch / Service Intake maximum is 0.005

 

Thank you Sir.
What specs do you recomend? Whats your preference?
laloquera

 

Saddly I'm only a middle of the road guy fairly new to the world of working on cars... though I do have a head for specs and just happen to have a D15b7 sitting on the desk next to me where I've almost finished replaceing all the Valves so I had the numbers handy.
I was just focused on makeing sure everything was in spec so I went for as close to 0.001 as I could get consistantly. figured things are most likely to wear down and gaps to increase via wear, so I'm trying to keep things really tight.

 

Thanks! Dont get mad, but I just set my intake at .08" & exhaust 10". Started it up and they are abit laud. Gona re do them tomorrow afternoon, but Im gonna follow your specs. Let me know when you get done with your project.
laloquera

 

Intake 0.001 to 0.002 inch/ Service Intake maximum is 0.003

Exhaust is 0.0002 to 0.003 inch / Service Intake maximum is 0.005

Holy ****, them gauges are almost paper thin, no wonder my valves sound like they are slaping.

TDC order: 1,3,4 & 2?

 

Can anyone validate this specs for me? I dont have manual or a vici sticker on the hood. Anyone?

Intake 0.001 to 0.002 inch/ Service Intake maximum is 0.003

Exhaust is 0.0002 to 0.003 inch / Service Intake maximum is 0.005

 

1-3-4-2 is correct. and those seem tight to me, but couldnt hurt, i have d16 and i was .007 and .009 but its also a different head. so the website i suggest is:

http://www.hondacarforum.com/honda-3...djustment.html

they confirm what i said about it

 

Thanks! Im going to with 007 & 009. I'll post up when Im dont.

 

^^