FS: Comptech SC, Volk SE37, Spoon lip, Spoon parts, T1R parts
Shipping is extra from buyer
My location is thornhill, Ontario, Canada
Comptech Aftercooled Supercharger Kit $2300 -> $2100 SOLD
- used with about 40k km
- fits all years of s2000
- not abused and running strong, kit is CARB legal
- previously used on conservative stock boost 5.5psi
- with no other engine/performance upgrades and only testpipe and stock exhaust car was tuned to 296.kwhp and 175trq
- selling whole kit with
Blower unit with brakets
Carbon cold air box
all mounting brackets
in tank high flow Fuel Pump (not included, could be replaced for ~$70)
Comptech Fuel Pressure Regulator
all hoses (one or two needs to be cut on the end to reuse since the end of the hose ripped on uninstall)
Drive belt
Comptech ESM unit
just missing a few spacers and bolts that are replaceable
- buyer would need to send their own pulley to CT Engineering for refinishing to be used with supercharger kit just like if you bought the kit new
info from link to purchase kit online: "Requires $400 for a core charge for the factory crank pulley, (Part# 350-041) which will be added to the price and refunded upon timely return of your undamaged stock crank pulley."
- alot more info could be found online about this reputable kit, this kit runs for $6000+ and i'm sure my price is reasonable
pictures of actual item for sale
http://img.photobucket.com/albums/v4...e/IMG_4422.jpg
http://img.photobucket.com/albums/v4...k/IMG_0564.jpg
http://img.photobucket.com/albums/v4...e/P1030527.jpg
http://img.photobucket.com/albums/v4...e/P1030541.jpg
http://img.photobucket.com/albums/v4...e/P1030542.jpg
http://img.photobucket.com/albums/v4...e/P1030543.jpg
more detailed pictures of each component
Descriptions:
picture55 - hoses/tubings view #1
picture56 - supercharger blower with inlet tube/oil lines view #1
picture57 - bolts and nuts
picture59 - aftercooler radiator
picture60 - supercharger blower with inlet/oil lines view #2
picture61 - aftercooler
picture63 - hoses/tubings view #2
picture65 - supercharger blower with inlet/oil lines view #3
picture66 - supercharger blower with inlet/oil lines view #4
picture67 - fuel pressure regulator(left), drive belt(left), carbon airbox and filter(right)
picture68 - cooling pump(left), vtec mounting block(right), alternator extension(right), stand off block(right), blower pulley(right), electronic signal modifier aka ESM(center)
picture69 - manual and instructions
http://img.photobucket.com/albums/v4...icture_065.jpg
http://img.photobucket.com/albums/v4...icture_066.jpg
http://img.photobucket.com/albums/v4...icture_056.jpg
http://img.photobucket.com/albums/v4...icture_060.jpg
http://img.photobucket.com/albums/v4...icture_069.jpg
http://img.photobucket.com/albums/v4...icture_059.jpg
http://img.photobucket.com/albums/v4...icture_061.jpg
http://img.photobucket.com/albums/v4...icture_067.jpg
http://img.photobucket.com/albums/v4...icture_068.jpg
http://img.photobucket.com/albums/v4...icture_057.jpg
http://img.photobucket.com/albums/v4...icture_055.jpg
http://img.photobucket.com/albums/v4...icture_063.jpg
Spoon reservoir covers(new) $30/pair, SOLD
- got 4 pairs -> 3 pairs left
http://n1racing.net/eshop/prod_images/44f3f93938c17.jpg
Spoon Sports 2010 Calender + Spoon Sports 2009 Calender(new) $30 for both -> $20
- never used


Integra Type R: Perfect Guide "TYPE R 徹底解説 無限 01SPEC完全収録" (new)$30 -> $20
- japanese
- brand new in plastic package
- 115 pages magazine, 90% coloured


Volk Racing SE37 $1100 SOLD
- 17x8.5 +40, 17x7.5 +30 staggered, 5x114.3
nice fit for rsx and s2k without modification and u could aim for hellaflush with these rims on other hondas
- Original Bronze
- Bridgestone Playz pz1 tires, 235 wider tires are shot, 215/45/17 tires are still good, about 60% or more
- Two rims are curbed, one 8.5" and one 7.5", pictures shows curbage. The remaining two rims are good.
SPOON DC2 Integra carbon lip (NEW) $800 SOLD
- authentic, brand new in wrap
- dc2 carbon front lip
- rare, discontinued
- price is firm
T1R plate frame covers(new) $10, SOLD
http://img.photobucket.com/albums/v4...54730270_1.jpg
FD2 JDM Type R key cover (new)$35 SOLD
- brand new in package not opened
http://www.aj-racing.com/shop/image.php?type=D&id=269
T1R PCD steering hub adapter(new) $40 SOLD
- This will make your MOMO hub to fit Nardi/Personal Steering or your MOMO Steerting wheel to Nardi/Personal hub adaptor. Made out of CNC machined Forged aluminum with anodized black finish.
Spoon thermostat(new) $70 SOLD
- for s2000
- retails for $100+
http://img.photobucket.com/albums/v4...k/IMG_0193.jpg
Contact
darkprince_0_@hotmail.com
thanks,
Henry
My location is thornhill, Ontario, Canada
Comptech Aftercooled Supercharger Kit $2300 -> $2100 SOLD
- used with about 40k km
- fits all years of s2000
- not abused and running strong, kit is CARB legal
- previously used on conservative stock boost 5.5psi
- with no other engine/performance upgrades and only testpipe and stock exhaust car was tuned to 296.kwhp and 175trq
- selling whole kit with
Blower unit with brakets
Carbon cold air box
all mounting brackets
in tank high flow Fuel Pump (not included, could be replaced for ~$70)
Comptech Fuel Pressure Regulator
all hoses (one or two needs to be cut on the end to reuse since the end of the hose ripped on uninstall)
Drive belt
Comptech ESM unit
just missing a few spacers and bolts that are replaceable
- buyer would need to send their own pulley to CT Engineering for refinishing to be used with supercharger kit just like if you bought the kit new
info from link to purchase kit online: "Requires $400 for a core charge for the factory crank pulley, (Part# 350-041) which will be added to the price and refunded upon timely return of your undamaged stock crank pulley."
- alot more info could be found online about this reputable kit, this kit runs for $6000+ and i'm sure my price is reasonable
pictures of actual item for sale
http://img.photobucket.com/albums/v4...e/IMG_4422.jpg
http://img.photobucket.com/albums/v4...k/IMG_0564.jpg
http://img.photobucket.com/albums/v4...e/P1030527.jpg
http://img.photobucket.com/albums/v4...e/P1030541.jpg
http://img.photobucket.com/albums/v4...e/P1030542.jpg
http://img.photobucket.com/albums/v4...e/P1030543.jpg
more detailed pictures of each component
Descriptions:
picture55 - hoses/tubings view #1
picture56 - supercharger blower with inlet tube/oil lines view #1
picture57 - bolts and nuts
picture59 - aftercooler radiator
picture60 - supercharger blower with inlet/oil lines view #2
picture61 - aftercooler
picture63 - hoses/tubings view #2
picture65 - supercharger blower with inlet/oil lines view #3
picture66 - supercharger blower with inlet/oil lines view #4
picture67 - fuel pressure regulator(left), drive belt(left), carbon airbox and filter(right)
picture68 - cooling pump(left), vtec mounting block(right), alternator extension(right), stand off block(right), blower pulley(right), electronic signal modifier aka ESM(center)
picture69 - manual and instructions
http://img.photobucket.com/albums/v4...icture_065.jpg
http://img.photobucket.com/albums/v4...icture_066.jpg
http://img.photobucket.com/albums/v4...icture_056.jpg
http://img.photobucket.com/albums/v4...icture_060.jpg
http://img.photobucket.com/albums/v4...icture_069.jpg
http://img.photobucket.com/albums/v4...icture_059.jpg
http://img.photobucket.com/albums/v4...icture_061.jpg
http://img.photobucket.com/albums/v4...icture_067.jpg
http://img.photobucket.com/albums/v4...icture_068.jpg
http://img.photobucket.com/albums/v4...icture_057.jpg
http://img.photobucket.com/albums/v4...icture_055.jpg
http://img.photobucket.com/albums/v4...icture_063.jpg
Spoon reservoir covers(new) $30/pair, SOLD
- got 4 pairs -> 3 pairs left
http://n1racing.net/eshop/prod_images/44f3f93938c17.jpg
Spoon Sports 2010 Calender + Spoon Sports 2009 Calender(new) $30 for both -> $20
- never used


Integra Type R: Perfect Guide "TYPE R 徹底解説 無限 01SPEC完全収録" (new)$30 -> $20
- japanese
- brand new in plastic package
- 115 pages magazine, 90% coloured


Volk Racing SE37 $1100 SOLD
- 17x8.5 +40, 17x7.5 +30 staggered, 5x114.3
nice fit for rsx and s2k without modification and u could aim for hellaflush with these rims on other hondas
- Original Bronze
- Bridgestone Playz pz1 tires, 235 wider tires are shot, 215/45/17 tires are still good, about 60% or more
- Two rims are curbed, one 8.5" and one 7.5", pictures shows curbage. The remaining two rims are good.
SPOON DC2 Integra carbon lip (NEW) $800 SOLD
- authentic, brand new in wrap
- dc2 carbon front lip
- rare, discontinued
- price is firm
T1R plate frame covers(new) $10, SOLD
http://img.photobucket.com/albums/v4...54730270_1.jpg
FD2 JDM Type R key cover (new)$35 SOLD
- brand new in package not opened
http://www.aj-racing.com/shop/image.php?type=D&id=269
T1R PCD steering hub adapter(new) $40 SOLD
- This will make your MOMO hub to fit Nardi/Personal Steering or your MOMO Steerting wheel to Nardi/Personal hub adaptor. Made out of CNC machined Forged aluminum with anodized black finish.
Spoon thermostat(new) $70 SOLD
- for s2000
- retails for $100+
http://img.photobucket.com/albums/v4...k/IMG_0193.jpg
Contact
darkprince_0_@hotmail.com
thanks,
Henry
Last edited by bibiboo; Aug 20, 2010 at 08:20 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
99v6sedan
Classifieds: Forced Induction
17
May 17, 2013 06:07 PM
Dforce
Southern California (Sales)
8
Aug 10, 2009 02:00 PM




