Acura Integra All Integra Except ITR

gsr cel code 8?

Thread Tools
 
Search this Thread
 
Old Mar 21, 2010 | 11:19 PM
  #1  
team 15's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2006
Posts: 256
Likes: 1
From: sacramento, Ca, U.S
Default gsr cel code 8?

My car is throwing code 8 which is tdc sensor. Does this mean i need a new distributor?
96 integra gsr. My car is eating lots of gas now like 120 miles for a full tank. Use to be around
280-330 miles for full tank.
Reply
Old Mar 21, 2010 | 11:36 PM
  #2  
imroadk1ll's Avatar
Honda-Tech Member
 
Joined: May 2006
Posts: 807
Likes: 0
From: 808
Default Re: gsr cel code 8?

its about your distributor but it could be your connection has gone bad. did measure the resistance on your 8P connector?

im also having the exact problem as you but i have a 95 gsr. i just need someone who can measure mines correctly because i dont know how. i have the helms manual
Reply
Old Mar 22, 2010 | 12:43 AM
  #3  
simboy2003's Avatar
Honda-Tech Member
 
Joined: Jun 2009
Posts: 28
Likes: 0
From: Greenville, SC
Default Re: gsr cel code 8?

Code 8 Top dead center sensor

you could fix it buy rebuilding the dizzy, but its not easy. get one index card and space the sensors inside of it, using the index card. i cant remember if it the middle one or not, there's 3 in all. I had a code 8 on my gsr before too. and its almost the same thing. and if it doesn't fix your problem, just buy a new dizzy.

hope this helps


ehh.. just saw yours is a 96. mine is a 95. but its still your dizzy. and the above should still help. just make sure you get the spacing right. oh and if you strip the screws inside the dizzy(very easy to do!) uses wire cutters on the side to break them loose.

Last edited by simboy2003; Mar 22, 2010 at 12:47 AM. Reason: added more
Reply
Old Mar 22, 2010 | 04:42 AM
  #4  
imroadk1ll's Avatar
Honda-Tech Member
 
Joined: May 2006
Posts: 807
Likes: 0
From: 808
Default Re: gsr cel code 8?

wat if its the wiring? i think i measured it right and i didnt get 350-700 ohms i got nothing. do i measure just that one connector or both together. sorry i aint good with electrical stuff
Reply
Old Mar 23, 2010 | 12:22 AM
  #5  
simboy2003's Avatar
Honda-Tech Member
 
Joined: Jun 2009
Posts: 28
Likes: 0
From: Greenville, SC
Default Re: gsr cel code 8?

both together.
Reply
Old Mar 23, 2010 | 03:41 AM
  #6  
imroadk1ll's Avatar
Honda-Tech Member
 
Joined: May 2006
Posts: 807
Likes: 0
From: 808
Default Re: gsr cel code 8?

both sides of the 8P connector now? just making sure. i still got no reading so im just gonna pick up a new distributor
Reply
Old Mar 23, 2010 | 11:46 PM
  #7  
simboy2003's Avatar
Honda-Tech Member
 
Joined: Jun 2009
Posts: 28
Likes: 0
From: Greenville, SC
Default Re: gsr cel code 8?

yeah you should. on the dizzy side, tho. hum ur checking then 1 and 2, then 3 and 4. so on and so on right. 1,3,5 on top and 2,4,6 under them. just like on the ecu pin outs?
Reply
Old Mar 24, 2010 | 04:24 AM
  #8  
imroadk1ll's Avatar
Honda-Tech Member
 
Joined: May 2006
Posts: 807
Likes: 0
From: 808
Default Re: gsr cel code 8?

ya i checked
Reply
Old Mar 24, 2010 | 10:01 AM
  #9  
simboy2003's Avatar
Honda-Tech Member
 
Joined: Jun 2009
Posts: 28
Likes: 0
From: Greenville, SC
Default Re: gsr cel code 8?

huh that's odd you should get something. try another dizzy and see where that gets you. sorry i could help more. im sure i could figure it out if i was there in person.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wyatt87
Acura Integra
9
Apr 26, 2014 10:19 AM
tygerEF2
Honda CRX / EF Civic (1988 - 1991)
2
Jul 12, 2011 03:27 PM
Psyotik123
Tech / Misc
11
May 3, 2009 10:59 AM
GuyInASpeedo
Honda CRX / EF Civic (1988 - 1991)
1
Sep 25, 2003 07:05 PM
wreckedagain
Tech / Misc
1
May 12, 2002 06:43 PM




All times are GMT -8. The time now is 02:16 AM.