Well guys i just bought a head with some blox b cams (competition) i was wondering if anyone has any problems with these cams.... i plan on running them i will be also running a precision 6262 billet .82 ar on a 84mm lsvtec 10:5:1 compression..... should i expect good results with these? I seen phill from spoolin mad the same hp on his street car on 4 psi less over ctr cams with these cams....


also do these cams need to be degreed or are they a straight drop in cam... i hear they are only a little more agressive than the type r cams.... anybody with any real world experience please chime in

 

I have the blox b's on my 84x89 setup with a 6765 and no complaints. I'm only at 425whp now but plan on making a lot more. I have the cam gears set at 0.

 

what psi are you at if you dont mind me asking

 

These are very compariable to the skunk2 tuner 2's

 

anybody know how they are strength wise? has anyone broken em or heard of anyone breaking them?

 

We've sold quite a few of these cams and never had any break. We have had one incident of them eating rockers and in turn eating away at the cams but that was determined to be installer error. They were replaced by BLOX nonetheless.

 

great cam for boost. im hoping for 680ish on them this year

 

i ran these cams on my 84X87 gsr with a billet 6262 and made 590whp on 19psi and pump gas

 

oooooo lawdy!!! i have a 10:5:1 compression lsvtec 84x89 mm with a precision 6262 in the works right now hopefully going to T1 in apirl or beginning of may! o my lord i cant wait

 

ineed. Blox Cams make really good power on low boost. Well see what the true cam is better on the dyno this year.

I bought the skunk2 tuner2 cams and my brother Brian has Blox B cams. Both have the same turbo set up/ head work/built and sleeved blocks. See how they match up!

 

I seen good things boost and all motor