ECU's, Skateboards, o2 Sensor, ect...
Located in SoCal (Lancaster/Palmdale) PayPal Payments to BSeriesILLEST1@yahoo.com
EDIT:Need this stuff gone. Just taking up space. All reasonable offers will not be refused
Lowering Springs - Pulled from my DB8. They were on the car when I bought it. They have no name or anything on them. They lowered the car about 2 1/2 inches or so. I went with coilovers because it was too low for my liking. - $50 Shipped
Front Brake Pads for 2000 TL - Duralast, Part # MKD787, BNIB. May fit other cars as well i.e. CL, TSX, Accord. Please make sure before purchasing if these will work for you - SOLD Locally
OBD0 PW0 ECU - I just found it in my shed lol. I have no clue where or when I used it lol. It has a clear case on it. I don't know if it works and I don't have any friend's running OBD0 who's cars I could test it out on. - Make an offer
OBD0 PM5 Auto ECU - From my old EF Sedan. Pulled it out when I did my B16/auto to manual swap - Free + Shipping
4040 Proportioning Valve - Was going to put it on my CRX when I did the rear disc conversion but I sold the car before I got a chance - $30 Shipped
OBD0 PR4 ECU - Pulled from my DB1 I sold. I did an OBD1 Conversion on it - SOLD Locally
OBD0 LS Distributor - Pulled from the DB1 mentioned above. Has brand new cap and rotor on it. Cap and rotor literally have 20 minutes of run time on them - SOLD Locally
OBD0 DX Distributor - Fairly new but I bent the shaft the rotor rides on. It still spins but not as freely as it used to. Coil, ignitor, and wire harness are still good though. Make offer for entire thing or if you just want one component off of it.
Pioneer DEH-6500 - No sleeve, no harness. I'm not even sure if it still works - SOLD Locally
Bosch Single Wire o2 Sensor - OE Connecter, BNIB - SOLD Locally
B Series Starter - pulled from a running 95 GSR - SOLD to illios
B Series Hydro Intermediate Shaft - from 95 GSR - $75 Shipped
A/C Torque Mount Bracket - P30 - $45 Shipped
Passenger Side Torque Mount Bracket - I don't remember what car this came off of but it might have been the same car the AC Torque Mount came off of - $25 Shipped
Motegi Racing Center Caps (Only 3 are pictured. I have all 4) - I don't know which wheels they'll fit - $20 Shipped
Z-Flex Eric Tuma Cruiser Deck - Near brand new. Hardly ever ridden. I forgot what exact model it is but it has the Venice Graffiti style underneath the board. Has Tracker Dart trucks, Z-Flex truck spacers, Z-Flex Z-Smooth 63mm wheels, and grip tape - $80 Shipped
Z-Flex 7.5" x 29" Jimmy Plummer Cruiser Deck, Blue - Never used. Has a few scratches from things laying on top of it but other than that, it's in great shape. No grip tape - $40 Shipped
Z-Flex 9" x 34" Cruiser Deck - I forgot what model it is but it's their old design with the palm trees underneath. Paint is kinda chipping/cracking due to just sitting there - $40 Shipped
I still have to sort through more boxes so i'll be adding a couple more parts when I find them.
Pics can be seen here: http://s71.photobucket.com/albums/i1.../VariousParts/
EDIT:Need this stuff gone. Just taking up space. All reasonable offers will not be refused
Lowering Springs - Pulled from my DB8. They were on the car when I bought it. They have no name or anything on them. They lowered the car about 2 1/2 inches or so. I went with coilovers because it was too low for my liking. - $50 Shipped
Front Brake Pads for 2000 TL - Duralast, Part # MKD787, BNIB. May fit other cars as well i.e. CL, TSX, Accord. Please make sure before purchasing if these will work for you - SOLD Locally
OBD0 PW0 ECU - I just found it in my shed lol. I have no clue where or when I used it lol. It has a clear case on it. I don't know if it works and I don't have any friend's running OBD0 who's cars I could test it out on. - Make an offer
OBD0 PM5 Auto ECU - From my old EF Sedan. Pulled it out when I did my B16/auto to manual swap - Free + Shipping
4040 Proportioning Valve - Was going to put it on my CRX when I did the rear disc conversion but I sold the car before I got a chance - $30 Shipped
OBD0 PR4 ECU - Pulled from my DB1 I sold. I did an OBD1 Conversion on it - SOLD Locally
OBD0 LS Distributor - Pulled from the DB1 mentioned above. Has brand new cap and rotor on it. Cap and rotor literally have 20 minutes of run time on them - SOLD Locally
OBD0 DX Distributor - Fairly new but I bent the shaft the rotor rides on. It still spins but not as freely as it used to. Coil, ignitor, and wire harness are still good though. Make offer for entire thing or if you just want one component off of it.
Pioneer DEH-6500 - No sleeve, no harness. I'm not even sure if it still works - SOLD Locally
Bosch Single Wire o2 Sensor - OE Connecter, BNIB - SOLD Locally
B Series Starter - pulled from a running 95 GSR - SOLD to illios
B Series Hydro Intermediate Shaft - from 95 GSR - $75 Shipped
A/C Torque Mount Bracket - P30 - $45 Shipped
Passenger Side Torque Mount Bracket - I don't remember what car this came off of but it might have been the same car the AC Torque Mount came off of - $25 Shipped
Motegi Racing Center Caps (Only 3 are pictured. I have all 4) - I don't know which wheels they'll fit - $20 Shipped
Z-Flex Eric Tuma Cruiser Deck - Near brand new. Hardly ever ridden. I forgot what exact model it is but it has the Venice Graffiti style underneath the board. Has Tracker Dart trucks, Z-Flex truck spacers, Z-Flex Z-Smooth 63mm wheels, and grip tape - $80 Shipped
Z-Flex 7.5" x 29" Jimmy Plummer Cruiser Deck, Blue - Never used. Has a few scratches from things laying on top of it but other than that, it's in great shape. No grip tape - $40 Shipped
Z-Flex 9" x 34" Cruiser Deck - I forgot what model it is but it's their old design with the palm trees underneath. Paint is kinda chipping/cracking due to just sitting there - $40 Shipped
I still have to sort through more boxes so i'll be adding a couple more parts when I find them.
Pics can be seen here: http://s71.photobucket.com/albums/i1.../VariousParts/
Last edited by B16RacerN2NR; Jun 9, 2010 at 07:45 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
B16RacerN2NR
Southern California (Sales)
29
Mar 28, 2010 11:05 AM



Entertaining any offers...

