VnZo-For Sale- Civic OEM, JDM, D16, Z6, Y7, Raybrig, S13, Soccer, etc! Cheap, Pics!!
UPDATED EVERYTHING 2-23-10 New even LOWER PRICES- Help clear this stuff out!!
MORE PICS, PRICES, PARTS, INFO! CHECK IT OUT!
I got a bunch of parts and other things, Seeing if anyone wants or needs them.
Some OEM, Some JDM, Some Misc.
D16Z6 Valve Cover- Was painted by previous owner, and I tested a few colors on it. Can be cleaned up good, Needs new spark plug gaskets, which are cheap and easy to do. * Started stripping the paint off should be clean for sale,
$20 or trade for clean 96-00 Non Vtec Valve cover
D16Z6 Block- Threw a rod, Still has good parts, had a newer timing belt and water pump, Good oil pan, Newer oil pan gasket. Sensors in the the back, Most of internals may be reusable, HAS A HOLE IN BLOCK AND THE BOTTOM ONE CYC 1'S ROD IS TRASH, and I haven't dissambled the block, Still have Head bolts if needed, Sold as is
$10 - just want this gone,
D16Y7 Head- Has been sitting for a little while, Came off my original motor that had a light knock. Never overheated on, Complete valve train, Good Core, No Dizzy, Sold as is
$20
Complete internals from D16Y7, one bad rod, most should be re-useable, Sold as is
$10
OBD2 10 pin to 2 plug OBD1 Distributor Conversion Harness, Pre-made ones go from 35-50 online. For using your stock OBD2 wire harness to plug into an OBD1 Distributor. NO LONGER FOR SALE
OEM D16Y7 Air box, Clean Good condition, Clean
$ 45
Clean 96-98 Headlights, Pretty Clean, Inner tab on pass headlight is broken, Will mount up just fine though, I had done a quick wetsand and buff, and I know they can shine up better with some work- $40
Clean EK Headliner, Bought for a project never used, Very small hole by pass front, Marks in pictures is some light dirt from my gloves, and marks are just from having some light items sitting on it- $30
Real RHD JDM Fuse Cover, Modded to work for LHD Civics and Tegs
$20
Raybrig Rear Plate Garnish *Rare* See Thread below
https://honda-tech.com/forums/honda-acura-28/raybrig-rear-license-plate-garnish-plate-holder-trim-ek-pics-inside-2697494/
$ 200 ?
JDM S13 Grill, Real JDM, Big Letter Style, All tabs intact, Great Condition
$60 OBO
Front and back Timing covers, Y7, Z6, Misc Pieces, Clean used water pump Y7 Couple thermostat housings, etc. Just ask for other small D16 parts
Smaller 12" Sub Box
Club America Soccer Seat Belt Pads, Pretty Mint, Never used by me, Just make an offer $3 Dollars or trade for Chivas pads, lol
Lots of other parts to list and pics and prices,
Located in the Northwest Suburbs of IL
**Also have a pair of decently clean and shiny GSR Blades, some curb marks, minor clear coat peeling, etc. One possible bend on one rim, Still been driving on it, Haven't had it checked out though yet, and it doesnt leak air, Overall pretty nice though. They have 205/50/15 Kuhmo Ecstas up front and some low low thread Falken Azenis in back, Pics available, Open to trades on those, with or without cash on mine or your end. So make me an offer** SOLD
Feel Free to Make Offers on any parts with or without a price above.
Also open to trades just let me know what you have and we can work something out.
Thanks
MORE PICS, PRICES, PARTS, INFO! CHECK IT OUT!
I got a bunch of parts and other things, Seeing if anyone wants or needs them.
Some OEM, Some JDM, Some Misc.
D16Z6 Valve Cover- Was painted by previous owner, and I tested a few colors on it. Can be cleaned up good, Needs new spark plug gaskets, which are cheap and easy to do. * Started stripping the paint off should be clean for sale,
$20 or trade for clean 96-00 Non Vtec Valve cover
D16Z6 Block- Threw a rod, Still has good parts, had a newer timing belt and water pump, Good oil pan, Newer oil pan gasket. Sensors in the the back, Most of internals may be reusable, HAS A HOLE IN BLOCK AND THE BOTTOM ONE CYC 1'S ROD IS TRASH, and I haven't dissambled the block, Still have Head bolts if needed, Sold as is
$10 - just want this gone,
D16Y7 Head- Has been sitting for a little while, Came off my original motor that had a light knock. Never overheated on, Complete valve train, Good Core, No Dizzy, Sold as is
$20
Complete internals from D16Y7, one bad rod, most should be re-useable, Sold as is
$10
OBD2 10 pin to 2 plug OBD1 Distributor Conversion Harness, Pre-made ones go from 35-50 online. For using your stock OBD2 wire harness to plug into an OBD1 Distributor. NO LONGER FOR SALE
OEM D16Y7 Air box, Clean Good condition, Clean
$ 45
Clean 96-98 Headlights, Pretty Clean, Inner tab on pass headlight is broken, Will mount up just fine though, I had done a quick wetsand and buff, and I know they can shine up better with some work- $40
Clean EK Headliner, Bought for a project never used, Very small hole by pass front, Marks in pictures is some light dirt from my gloves, and marks are just from having some light items sitting on it- $30
Real RHD JDM Fuse Cover, Modded to work for LHD Civics and Tegs
$20
Raybrig Rear Plate Garnish *Rare* See Thread below
https://honda-tech.com/forums/honda-acura-28/raybrig-rear-license-plate-garnish-plate-holder-trim-ek-pics-inside-2697494/
$ 200 ?
JDM S13 Grill, Real JDM, Big Letter Style, All tabs intact, Great Condition
$60 OBO
Front and back Timing covers, Y7, Z6, Misc Pieces, Clean used water pump Y7 Couple thermostat housings, etc. Just ask for other small D16 parts
Smaller 12" Sub Box
Club America Soccer Seat Belt Pads, Pretty Mint, Never used by me, Just make an offer $3 Dollars or trade for Chivas pads, lol
Lots of other parts to list and pics and prices,
Located in the Northwest Suburbs of IL
**Also have a pair of decently clean and shiny GSR Blades, some curb marks, minor clear coat peeling, etc. One possible bend on one rim, Still been driving on it, Haven't had it checked out though yet, and it doesnt leak air, Overall pretty nice though. They have 205/50/15 Kuhmo Ecstas up front and some low low thread Falken Azenis in back, Pics available, Open to trades on those, with or without cash on mine or your end. So make me an offer** SOLD
Feel Free to Make Offers on any parts with or without a price above.
Also open to trades just let me know what you have and we can work something out.
Thanks
Last edited by VnZo; Mar 3, 2010 at 04:54 AM. Reason: Pics, Prices, More Items, and Info
Some Nice Valentines Day Gifts here, Your girl will love some Honda Parts!!
Hurry up and pick something up!!
Hurry up and pick something up!!
Trending Topics
All PM's Replied
Heres pics of the Headlights and Headliner just taken tonight, Flash on camera makes everything look a little different
And I just realized the inside tab on the pass headlight is broken, It will mount up just fine though
Heres pics of the Headlights and Headliner just taken tonight, Flash on camera makes everything look a little different
And I just realized the inside tab on the pass headlight is broken, It will mount up just fine though
Heres the pictures of the Blades- I just quickly wiped them tonight, and the camera flash really did bring out every single imperfection, Which is good some people know what they have, All of those scratches are not that easily noticable and they really do look better in person.
*Also those black circles are just blacking out the locks on them
*Also those black circles are just blacking out the locks on them
Get this stuff sold, Blades should be for sale after tonight!
Will part out any engine parts you may want,
Will take best offer on any piece, even below listed price!
Will part out any engine parts you may want,
Will take best offer on any piece, even below listed price!
Sale Pending on OEM Air Intake
I wonder why No one on Honda-Tech wants Club America Set Belt Pads or a JDM Nissan S13 Grill????
I wonder why No one on Honda-Tech wants Club America Set Belt Pads or a JDM Nissan S13 Grill????
Bumps
PM me if you need any thing D16 related and want it for cheapppp, I have lots of misc. parts not listed
Thanks
PM me if you need any thing D16 related and want it for cheapppp, I have lots of misc. parts not listed
Thanks


