Raybrig Rear License Plate Garnish ? Plate Holder / Trim for EK?!? - PICS INSIDE -
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: IL
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Raybrig Rear License Plate Garnish ? Plate Holder / Trim for EK?!? - PICS INSIDE -
I have a Rear License Plate Garnish made by what seems to be Raybrig. Does anyone know anything about these??
I know Raybrig makes the Fogs, Light bulbs, and other lighting products.
This is for a 96-00 Civic and fits on Hatches and Trunk Lids. It is red in color, and has a sort of reflector look to it, looks similair to the rear tail lights and looks somewhat like my JDM S13 grill's pattern. Also it looks to be somewhat JDM because there are wider holes for the license plate screws, and looks like someone had cut squares to make it fit a United States plate. There is a Raybrig logo right above the key hole too. Mounts with all the same factory Hardware too. I haven't found any part number or other markings on this.
I have never seen another one of these or heard about it before. Searching all over the internet I cannot seem to find anything about this, another one for sale, a picture installed, by its self, or even a listing for it. I've tried searching all kinds of different names everything. And whether or not this is really made by Raybrig and I can't find another replica one like this or anything else for sale at all, just stock replacement garnishs/ plate trims/ holders, etc.
Please someone help me figure out the part, if it is real and if so how rare is this, or am I just missing something, Either way I like it and it is different
Here are the Pics, And I can take any other additional pics needed.
**UPDATES ON PAGE TWO!!!**
I know Raybrig makes the Fogs, Light bulbs, and other lighting products.
This is for a 96-00 Civic and fits on Hatches and Trunk Lids. It is red in color, and has a sort of reflector look to it, looks similair to the rear tail lights and looks somewhat like my JDM S13 grill's pattern. Also it looks to be somewhat JDM because there are wider holes for the license plate screws, and looks like someone had cut squares to make it fit a United States plate. There is a Raybrig logo right above the key hole too. Mounts with all the same factory Hardware too. I haven't found any part number or other markings on this.
I have never seen another one of these or heard about it before. Searching all over the internet I cannot seem to find anything about this, another one for sale, a picture installed, by its self, or even a listing for it. I've tried searching all kinds of different names everything. And whether or not this is really made by Raybrig and I can't find another replica one like this or anything else for sale at all, just stock replacement garnishs/ plate trims/ holders, etc.
Please someone help me figure out the part, if it is real and if so how rare is this, or am I just missing something, Either way I like it and it is different
Here are the Pics, And I can take any other additional pics needed.
**UPDATES ON PAGE TWO!!!**
Last edited by VnZo; 10-17-2010 at 03:05 AM.
#2
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: IL
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Re: Raybrig Rear License Plate Garnish ? Plate Holder / Trim for EK?!? - PICS INSIDE
If you have any other pics of this Post em up, and lets see them
And any help or additional info would be great!
And any help or additional info would be great!
#4
Honda-Tech Member
Join Date: May 2003
Location: Sacramento, USA
Posts: 4,646
Likes: 0
Received 0 Likes
on
0 Posts
Re: Raybrig Rear License Plate Garnish ? Plate Holder / Trim for EK?!? - PICS INSIDE
I remember back in the 90's Zender or Hondasport use to make one like it for the Ej
#5
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: IL
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Re: Raybrig Rear License Plate Garnish ? Plate Holder / Trim for EK?!? - PICS INSIDE
Negative on any part numbers or even manufacturing markings, I've looked it over so many times and just checked it again.
And thanks VTEC_Club I will continue my search with those guys
I'm curious if this is some JDM Ricer part that never made it over here
And thanks VTEC_Club I will continue my search with those guys
I'm curious if this is some JDM Ricer part that never made it over here
#6
H-T White Ops
Re: Raybrig Rear License Plate Garnish ? Plate Holder / Trim for EK?!? - PICS INSIDE
Seen them before but I don't have any information on them.
I do have a photo of one for a 5G Civic though.
I do have a photo of one for a 5G Civic though.
#7
H-T White Ops
Re: Raybrig Rear License Plate Garnish ? Plate Holder / Trim for EK?!? - PICS INSIDE
Oh, and I would imagine it's for the Japanese market since the license plate mounting holes have been cut out. The Japanese plate holes aren't the same as the US ones IIRC. I had to put a Japanese trunk on a friend's Civic once and that turned out to be a problem.
Trending Topics
#9
#10
H-T White Ops
#11
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: IL
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Re: Raybrig Rear License Plate Garnish ? Plate Holder / Trim for EK?!? - PICS INSIDE
Thanks guys, Currently I have no Red Civics or Red Trunks, But I'll put it on my silver hatch to get you guys a better installed pic.
Still anyone else know the orgin of these things or is there another one out there in the world lol?
Still anyone else know the orgin of these things or is there another one out there in the world lol?
#12
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: IL
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Re: Raybrig Rear License Plate Garnish ? Plate Holder / Trim for EK?!? - PICS INSIDE
Thanks NOFX for the other pic, Do you know if that was made by Raybrig?
#13
H-T White Ops
Re: Raybrig Rear License Plate Garnish ? Plate Holder / Trim for EK?!? - PICS INSIDE
I wish I had more, but I don't have any information about the part I posted except for what we can see in the image. Sorry.
#14
B*a*n*n*e*d
Join Date: Aug 2007
Location: Who Cares
Posts: 1,278
Likes: 0
Received 0 Likes
on
0 Posts
Re: Raybrig Rear License Plate Garnish ? Plate Holder / Trim for EK?!? - PICS INSIDE
Crazy rare part, never seen one....but its ugly as hell. Probably rare for a reason.
#18
H-T White Ops
#20
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: IL
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Re: Raybrig Rear License Plate Garnish ? Plate Holder / Trim for EK?!? - PICS INSIDE
Any one else seen one of these over here before? I know you Cali guys got all kinds of crazy parts, Anyone from Japan?
#21
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: IL
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Re: Raybrig Rear License Plate Garnish ? Plate Holder / Trim for EK?!? - PICS INSIDE
I am still curious about this, It very nice quality and fits perfectly OEM. Any one else know anything about this? Or where to get another one?
#23
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: IL
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Re: Raybrig Rear License Plate Garnish ? Plate Holder / Trim for EK?!? - PICS INSIDE
It really is, And the quality really seems pretty solid, It is just hard to believe I can not find any other info or seen another one around at all. Still looking for answers