for fastest response email me at TLdream06@gmail.com

parts list
h23 block sleeved by golden eagle with full deck sleeves, not liners - $1500
h22 crank - $300
h22 eagle rods - $300
cp pistons - $500
new oilpump, all bearings, and seals - $300
arp head studs - $150
arp main studs - $125
weisco hg - $100
h22 head - $300
aem fuel rail - $125
preceision 1000cc injectors - $300
golden eagle intake manifold - $500
skunk2 valve springs, valve spring retainers, and valves - $700
skunk2 stage 2 turbo cams - $500
skunk2 cam gears - $240
Blox 72mm tb - $150
h22 transmission $300
gearspeed h22 synchro set - $250
lsd (new bearings) - $500

turbo stuff
gt40(blowzilla) turbo - $1000
2 44mm tial waste gates $$700
custom manifold - $1400
griffen 600hp intercooler - $400
walbro fuel pump $100
sandwich plate - $50
stainless oil lines - $50
Intercooler piping - $300
Innovative alt reloc bracket - $75

turbo stuff $4000
head $2815
trans$1100
block $3275

total $11,265

I will like to sell this for $6500 shipped.

Motor is not assembled right now. Block has not been used after it was sleeved. The pistons and rods are in the block, but i was waiting to get a kaizenspeed bs elimination kit before i finished everything. I would suggest having your local machine shop/engine building assemble everything, torque it to spec, and document.

The transmission does not have the lsd or synchro set installed yet.

Head has been used, and will include stock cams and gears. The turbo cams were used for roughly 200 miles, the skunk 2 gears are new.

Missing a blow off valve, ems, and a few seals and belts.

I will trade this motor for a clean 5th gen 5 speed base prelude. Or sell for $6500 obo shipped. I have been collecting these parts for the past year. The only reason i am selling it is because i am going even bigger (3.5L).

More pictures on request. Im not going to part anything out unless all of it is spoken for. I will use this setup if i dont sell it. I just have bigger plans.

 

more pictures upon request.

 

Somebody NEEDs this more than i do.

 

let me know if you want to sell the valve cover

 

bump...... what lsd do you have?

 

Its a rebuilt obx, with quality hardware, and new oem bearings.

I would like to sell everything all together, thats why i have it listed almost %50 less than its worth.

Currently pending trade.

 

up one more time before its gone.

 

i need alot of ur parts if ur willing to part out i call me at 516-503-7873 also email niccholas64@aol.com

 

ill buy the manifold if your are sellin it

 

well?