MD: Complete B Series Turbo Kit
Turbo: Borg Warner T3/TO4E 50 trim .55 A/R with a stage III exhaust wheel
Other stuff: 550cc RC Injectors (with resistor box), Ebay FMIC and piping, Tial wastegate (multiple springs), Blox MBC, Greddy BOV, Hondata S200, blox cast manifold, blox 2.5" downpipe
This setup is currently in my Hatch bolted to an LS motor. I need an OBD2 LS ECU and stock injectors so if you have a car with a swapped LS motor or a LS/RS Integra this is what you need.
I'll sell all the stuff above for $2000, it's tuned up to 15 psi by Joe @ Tempest Racing and made 280HP through a 2.5" exhaust. Open it up to 3" and make 300HP all day.
I've put less than 2k miles on this setup since it's been installed in the car.

Other stuff: 550cc RC Injectors (with resistor box), Ebay FMIC and piping, Tial wastegate (multiple springs), Blox MBC, Greddy BOV, Hondata S200, blox cast manifold, blox 2.5" downpipe
This setup is currently in my Hatch bolted to an LS motor. I need an OBD2 LS ECU and stock injectors so if you have a car with a swapped LS motor or a LS/RS Integra this is what you need.
I'll sell all the stuff above for $2000, it's tuned up to 15 psi by Joe @ Tempest Racing and made 280HP through a 2.5" exhaust. Open it up to 3" and make 300HP all day.
I've put less than 2k miles on this setup since it's been installed in the car.

Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
JDMs1eeper
Classifieds: Forced Induction
21
Mar 22, 2006 02:03 PM
b18velocity
Classifieds: Forced Induction
9
Aug 7, 2005 03:58 PM




