I have a complete tilton twin disk setup for sale, its for a b series. This includes the complete kit. It has a 10lb flywheel, pressure plate, disks, and the complete hydro throwout bearing kit. This is with master cylinder and hydro throughout bearing and stainless line. Everything is brand new and never been installed. Also inlcluded is a set of brand new honda AT trans flywheel bolts needed with this flywheel. Its complete i paid 1800 for everything. Asking 1250$ shipped cheaper then just the clutch setup you chance to save big. ill post pics later give me a call or email me if you are interested 7403347476.
http://is7.itookthisonmyphone.com/m/...7_100x75r0.jpg
http://www.itookthisonmyphone.com/co...22c12a59358048
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg

I also have a complete long block race motor. Its a b18b Block sleeve and machined by ERL ITS complete with erl superdeck 1 sleeves, erl 5 main girdle, and erl installed half inch head studs. LS crank micropolished and balanced. It has pauter connecting rods, and JE 84.5mm pistons they are 9.0 compression, and have the double forged wrist pin option. The cylinder head is a b16 head completely port and polished and combustion chambers were matched to the bore size. It has a ferrea valves intake +1 and stock exhaust size. Supertech springs and retainers, all brand new valve locks, seals, everything. It has Skunk2 Pro 1 cams, full race cam gears, golden eagle lsvtec kit, cometic custom head gasket, B and R block fittings -10 for catch can set up. morroso tigwelded aluminum oil pan, morroso matching pick up, and oilpan stud kit, and more. It has a complete meziere electric water pump setup.
Its complete from oil pan to valve cover. Every bolt is new including cam caps and all accessories. Every seal is brand new and from honda. It has a brand new type R oil pump, type R tensioner, and a timing belt. This is a no joke motor, and is complete and ready to go. Its all brand new, i have boxes for everything all machine work was done by ERL. Ill post pictures of everything shortly hear. Also included is a powder coated white valve cover. Let me know if you have any questions or want to come and check it out. I am asking 5000OBO i have over 8k invested and its all new still.





http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
i am also throwing in the rear catch can setup with lines
I have to get some more recent photos but everything everything is new and its in great shape. its fully assembled with the cams degreed in and timing belt on i just dont have the most recent pictures

i also have a brand new S372 R bullseye power turbo asking 1250$ shipped as well
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg

I have a aem 1040 unit with obd2 B plug for sale 600$ forgot to take pictures

Fullblown twin walbro setup with 2 walbros 375$ new
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg

under 5k miles ona set of dss stage 2.9 500hp drive shaft shop b series axles 375$
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg

Innovative Ek B series solid black motor mounts 275$
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg

Precision 1600cc injectors, 250$ new

GSR fat five 225
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://www.itookthisonmyphone.com/co...0a4c1003ee10a9

AEM EBPM distributor module for honda 175$

I also have a set of 13 inch bogarts with m and h 24.5's and bear billit 1/2 inch spacersfor 375 tires are used but in good shape
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg

I have more stuff to sell let me go through everything and get some photos up. I am in ohio everything is real and new and no BS. I need some cash to move so stuff is priced to go and i am willing to deal some. Give me a call or email me my number is 740334 7476
Thanks corey

 

Are you selling the IM seperately?

 

bump

 

Intake manifold has been sold ill try and go get pics of everything here later today. I also have a set of 13 inch bogarts with m and h 24.5's and bear billit 1/2 inch spacersfor 375 tires are used but in good shape

 

Is the fullblown kit for an EK? Is it new? Are you willing to sell it without the fuel pumps.

 

yea everything was bought for a 2000 si yes its new and id sell without pumps as welll

 

Bump

 

added pictures let me know what you need i need some cash so if anybody wants to buy something ill work with the price for the first person

 

Pm'd

 

replyd cmon some great deals here

 

do you have the tilton control valve for the clutch?

 

I am interested in the axles and 2 of the mounts if you are willing to separate.

 

no control valve, and i dont want to sepparate mounts. All three or nothing

 

Pm'd

 

Payment sent on the Precision 1600cc injectors with R/C clips

And fuel lines

 

do u still have Precision 1600cc injectors, 250$ new send me paypal ill take them

 

is the turbo still available if so pm will pick up

 

ttt