MY f-up sell all thread s372 tilton erl sleeved ls vtec, etc PICTURES
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2008
Location: Lancaster, oh, USA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
MY f-up sell all thread s372 tilton erl sleeved ls vtec, etc PICTURES
I have a complete tilton twin disk setup for sale, its for a b series. This includes the complete kit. It has a 10lb flywheel, pressure plate, disks, and the complete hydro throwout bearing kit. This is with master cylinder and hydro throughout bearing and stainless line. Everything is brand new and never been installed. Also inlcluded is a set of brand new honda AT trans flywheel bolts needed with this flywheel. Its complete i paid 1800 for everything. Asking 1250$ shipped cheaper then just the clutch setup you chance to save big. ill post pics later give me a call or email me if you are interested 7403347476.
http://is7.itookthisonmyphone.com/m/...7_100x75r0.jpg
http://www.itookthisonmyphone.com/co...22c12a59358048
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
I also have a complete long block race motor. Its a b18b Block sleeve and machined by ERL ITS complete with erl superdeck 1 sleeves, erl 5 main girdle, and erl installed half inch head studs. LS crank micropolished and balanced. It has pauter connecting rods, and JE 84.5mm pistons they are 9.0 compression, and have the double forged wrist pin option. The cylinder head is a b16 head completely port and polished and combustion chambers were matched to the bore size. It has a ferrea valves intake +1 and stock exhaust size. Supertech springs and retainers, all brand new valve locks, seals, everything. It has Skunk2 Pro 1 cams, full race cam gears, golden eagle lsvtec kit, cometic custom head gasket, B and R block fittings -10 for catch can set up. morroso tigwelded aluminum oil pan, morroso matching pick up, and oilpan stud kit, and more. It has a complete meziere electric water pump setup.
Its complete from oil pan to valve cover. Every bolt is new including cam caps and all accessories. Every seal is brand new and from honda. It has a brand new type R oil pump, type R tensioner, and a timing belt. This is a no joke motor, and is complete and ready to go. Its all brand new, i have boxes for everything all machine work was done by ERL. Ill post pictures of everything shortly hear. Also included is a powder coated white valve cover. Let me know if you have any questions or want to come and check it out. I am asking 5000OBO i have over 8k invested and its all new still.
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
i am also throwing in the rear catch can setup with lines
I have to get some more recent photos but everything everything is new and its in great shape. its fully assembled with the cams degreed in and timing belt on i just dont have the most recent pictures
i also have a brand new S372 R bullseye power turbo asking 1250$ shipped as well
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
I have a aem 1040 unit with obd2 B plug for sale 600$ forgot to take pictures
Fullblown twin walbro setup with 2 walbros 375$ new
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
under 5k miles ona set of dss stage 2.9 500hp drive shaft shop b series axles 375$
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
Innovative Ek B series solid black motor mounts 275$
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
Precision 1600cc injectors, 250$ new
GSR fat five 225
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://www.itookthisonmyphone.com/co...0a4c1003ee10a9
AEM EBPM distributor module for honda 175$
I also have a set of 13 inch bogarts with m and h 24.5's and bear billit 1/2 inch spacersfor 375 tires are used but in good shape
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
I have more stuff to sell let me go through everything and get some photos up. I am in ohio everything is real and new and no BS. I need some cash to move so stuff is priced to go and i am willing to deal some. Give me a call or email me my number is 740334 7476
Thanks corey
http://is7.itookthisonmyphone.com/m/...7_100x75r0.jpg
http://www.itookthisonmyphone.com/co...22c12a59358048
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
I also have a complete long block race motor. Its a b18b Block sleeve and machined by ERL ITS complete with erl superdeck 1 sleeves, erl 5 main girdle, and erl installed half inch head studs. LS crank micropolished and balanced. It has pauter connecting rods, and JE 84.5mm pistons they are 9.0 compression, and have the double forged wrist pin option. The cylinder head is a b16 head completely port and polished and combustion chambers were matched to the bore size. It has a ferrea valves intake +1 and stock exhaust size. Supertech springs and retainers, all brand new valve locks, seals, everything. It has Skunk2 Pro 1 cams, full race cam gears, golden eagle lsvtec kit, cometic custom head gasket, B and R block fittings -10 for catch can set up. morroso tigwelded aluminum oil pan, morroso matching pick up, and oilpan stud kit, and more. It has a complete meziere electric water pump setup.
Its complete from oil pan to valve cover. Every bolt is new including cam caps and all accessories. Every seal is brand new and from honda. It has a brand new type R oil pump, type R tensioner, and a timing belt. This is a no joke motor, and is complete and ready to go. Its all brand new, i have boxes for everything all machine work was done by ERL. Ill post pictures of everything shortly hear. Also included is a powder coated white valve cover. Let me know if you have any questions or want to come and check it out. I am asking 5000OBO i have over 8k invested and its all new still.
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
i am also throwing in the rear catch can setup with lines
I have to get some more recent photos but everything everything is new and its in great shape. its fully assembled with the cams degreed in and timing belt on i just dont have the most recent pictures
i also have a brand new S372 R bullseye power turbo asking 1250$ shipped as well
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
I have a aem 1040 unit with obd2 B plug for sale 600$ forgot to take pictures
Fullblown twin walbro setup with 2 walbros 375$ new
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
under 5k miles ona set of dss stage 2.9 500hp drive shaft shop b series axles 375$
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
Innovative Ek B series solid black motor mounts 275$
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
Precision 1600cc injectors, 250$ new
GSR fat five 225
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://www.itookthisonmyphone.com/co...0a4c1003ee10a9
AEM EBPM distributor module for honda 175$
I also have a set of 13 inch bogarts with m and h 24.5's and bear billit 1/2 inch spacersfor 375 tires are used but in good shape
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
http://is7.itookthisonmyphone.com/m/..._568x426r0.jpg
I have more stuff to sell let me go through everything and get some photos up. I am in ohio everything is real and new and no BS. I need some cash to move so stuff is priced to go and i am willing to deal some. Give me a call or email me my number is 740334 7476
Thanks corey
Last edited by 3rdshift; 12-30-2009 at 10:58 PM. Reason: added picts
#4
Honda-Tech Member
Thread Starter
Join Date: Nov 2008
Location: Lancaster, oh, USA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Re: MY f-up sell all thread s372 tilton erl sleeved ls vtec, etc etc full blown aem
Intake manifold has been sold ill try and go get pics of everything here later today. I also have a set of 13 inch bogarts with m and h 24.5's and bear billit 1/2 inch spacersfor 375 tires are used but in good shape
#5
Honda-Tech Member
Join Date: Jun 2002
Location: Florida, us
Posts: 2,105
Likes: 0
Received 0 Likes
on
0 Posts
Re: MY f-up sell all thread s372 tilton erl sleeved ls vtec, etc etc full blown aem
Is the fullblown kit for an EK? Is it new? Are you willing to sell it without the fuel pumps.
#6
Honda-Tech Member
Thread Starter
Join Date: Nov 2008
Location: Lancaster, oh, USA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Re: MY f-up sell all thread s372 tilton erl sleeved ls vtec, etc etc full blown aem
yea everything was bought for a 2000 si yes its new and id sell without pumps as welll
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Nov 2008
Location: Lancaster, oh, USA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Re: MY f-up sell all thread s372 tilton erl sleeved ls vtec, etc PICTURES
added pictures let me know what you need i need some cash so if anybody wants to buy something ill work with the price for the first person
#12
Honda-Tech Member
Join Date: Jun 2007
Location: Cleveland, ohio, usa
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Re: MY f-up sell all thread s372 tilton erl sleeved ls vtec, etc PICTURES
I am interested in the axles and 2 of the mounts if you are willing to separate.
#13
Honda-Tech Member
Thread Starter
Join Date: Nov 2008
Location: Lancaster, oh, USA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Re: MY f-up sell all thread s372 tilton erl sleeved ls vtec, etc PICTURES
no control valve, and i dont want to sepparate mounts. All three or nothing
Thread
Thread Starter
Forum
Replies
Last Post
OEMJDM
Southern California (Sales)
1
01-08-2011 11:18 AM
3rdshift
Classifieds: Forced Induction
1
12-26-2009 03:25 PM
acidburn69
Honda CRX / EF Civic (1988 - 1991)
1
04-05-2004 12:48 AM