Hey everyone I have been searching all over the place and I figured I would try posting here. The problem im having is that im swapping a b18 into a 95 civic 4 door. The only problem is the guy that sold me the swap did not include the bolt and 2 nuts for the upper driver side motor mount. So i guess ill hafto get them from lowes. Does anyone know what kind of bolt and nut i should get from lowes???

 

Its the three bolt mount BTW

 

Bump need this done before mon so i can get to work

 

M10-1.25 is what your looking for

or just grab a nut off your strut bolt, its a 14mm nut and go size it at lowes. and find a bolt that threads through the nut..

 

thanks for the info i been looking all over the net to find out what i need to do to keep power steering in my b18b1 swapped eg four door any one know what ill need im going to junk yard tomorrow or what will i need to not run power steering

 

good night bump

 

Get the power steering pump and mounts fromt he motor you are using, not for the car you are putting it in.