F/S 84mm NEW HIGH comp pistons CHEAP
Thread Starter
Junior Member
Joined: Jun 2002
Posts: 859
Likes: 0
From: Fargo, ND, USA
F/S 84mm NEW HIGH comp pistons CHEAP
So here I have a set of 84mm High compression pistons. They are BNIB, just got shipped around a couple of times so the box is a little beat up. Comes with pistons, wrist pins and locks, and rings. All new, never been used
These can be used in any 84mm engine as far as i know. here are the compression ratios for a couple setups
Part #: 209847
Bore: 84.0mm
Compression: 12.0 for Integra GSR B18C1
Compression: 12.0 for Integra LS/RS B18A/B with B16A Head
Compression: 10.3 for Civic Si /Del Sol B16A
Compression: 12.0 for B20 VTEC with B16A Head
These retail on JE's website for $634 http://www.jepistons.com/Products/209847.aspx
EDIT!! ill take 350$ OBO guys!
These can be used in any 84mm engine as far as i know. here are the compression ratios for a couple setups
Part #: 209847
Bore: 84.0mm
Compression: 12.0 for Integra GSR B18C1
Compression: 12.0 for Integra LS/RS B18A/B with B16A Head
Compression: 10.3 for Civic Si /Del Sol B16A
Compression: 12.0 for B20 VTEC with B16A Head
These retail on JE's website for $634 http://www.jepistons.com/Products/209847.aspx
EDIT!! ill take 350$ OBO guys!
Last edited by AaronJ; Dec 20, 2009 at 04:44 PM.
Trending Topics
Honda-Tech Member
Joined: Apr 2008
Posts: 991
Likes: 0
From: Luke AFB
Re: F/S 84mm NEW HIGH comp pistons CHEAP
Did the compression calculations:
B18C1 Head - 12.5:1 Cr
w/ Cometic .030" HG - 12.34:1Cr
B16A Head - 12.2:1 Cr
w/ Cometic .030' HG - 12.06:1Cr
Using Zealautowerks.com's Calculator.
Just FYI.
BUMP!
B18C1 Head - 12.5:1 Cr
w/ Cometic .030" HG - 12.34:1Cr
B16A Head - 12.2:1 Cr
w/ Cometic .030' HG - 12.06:1Cr
Using Zealautowerks.com's Calculator.
Just FYI.
BUMP!
Thread
Thread Starter
Forum
Replies
Last Post
Integralove00
Classifieds: Forced Induction
24
Sep 11, 2004 04:40 AM
