hey Am new at this what would be a good v tech motor to fit in my 90 accord with no problem? its an 5 speed an i dont want to spend more than 2300 for the motor an trans, is there a way that i can use all my old stuff from my factory motor?

 

go with a DOHC H22A1, a nice upgrade from your current engine, and it should fit with little or few modifications

 

+1 , there is a good write up in the fact, heres the link http://www.accordinglydone.com/forum...ead.php?t=9744 you can also go to cb7turner.com (all accords) they have lots of info too on the swap

 

JDM H22 all the way bruh.

 

will i have to change my computer? if so what would be the the computer an would i have to get an jump wiring harness?

 

if you are going with an h22a1, you can get a chipped p28 for it. and yes, to convert to obd1, you will need a jumper harness.

 

okay so where can i get an jumper harness an p28 chip from? an whats the price

 

http://lmgtfy.com/?q=obd1+conversion+harness

some of those same companies on the front page sell ecu's as well. or try ebay, craigslist, or even the honda-tech market place.

 

You can run a p28 chipped w/H22 basemap ecu with any JDM or USDM H22. Just make sure you have a jumper harness so you can plug N play the OBD1 p28 ecu.

 

can anyone send or make me an excat list of what ill need to put the h22 into my 90 accord? i dont want to buy all this stuff an i dont need it. thanks.

 

nothin like searching for yourself man. you have the same forum pages as i do. i can find it, why can't you? you want spoon fed your whole life? http://www.accordinglydone.com/forum...hread.php?t=29

 

what are the steps to convert a drum rear brakes to an disc? is it hard an what do i have to do? what make would i have to get the disc from to fit my car?