yesterday november 6 2009 i took my car that was built and tune by me and we ran our best time of 12.3@107 mph with 22" slicks i know at least with some 23" i can run better

specs of the engine:

-type r short block with ctr pistons

-head port and polish by my homeboy from p.r melvin racing heads

-aebs manifold port by my boy alex from humble performance

-rocket motorsports cams

-hy-tech replica header

-ericks racing trottle body and hondata s300

the tuning was made on the STREET no dyno tuning yet dyno tunning coming soon.


http://s1004.photobucket.com/albums/...t=102_1056.jpg
http://s1004.photobucket.com/albums/...t=102_1049.jpg


http://s1004.photobucket.com/albums/...t=102_1048.jpg

 

which rocket cams were these?

 

rocket m24 xx

 

What CR and tranny FD are you using?

 

the cr is around 12.5.1 and the final drive is 4.78

 

what car is it in? how much does it weigh?

 

is a 92 civic vx and I think weight around 2000 with me inside

 

nice! I think we have pretty similar setups. I went 12.6@107 in my '91 CRX HF. I haven't weighed it yet but I think I am at about 2000 with me in it. I want to get a better differential so I can try to cut 1.6 60's instead of 1.75's. I think we can run 12.3's with the 107 trap we have after getting better traction.

 

Rocket

 

Nice and simple setup..that's a true streetcar setup.

 

11's coming soon !

 

Congrats papa.

 

im going to do some smal changes and I hope to break in the 11s

 

i noticed you gave props to Endyn

you wouldnt happen to have any dynos of Bumpstix in a modded B16A would you?

 

yes--no--maybe?

jus want another source of reference

 

No Bumpstix dynoes here.
I will have a B16 with Rocket M25x soon...

 

with big bore right?

 

WOW!! VERY interested to see that!! what i am also interested in seeing are the M24s on a B16A.... can you oblige??

 

No, 81.08.
That is just a crazy trial. IMO even a m22 is big into a b16. That m25 is a big on an other level.

 

when can we plan on seeing this "Crazy Trial"??

 

Final tune will be on friday... dyno after that, no exact date yet.
In case I will not be satisfied with it then the much smaller TODA Cs and smaller IM (IB ported ITR) will come into play. I will let U know here.

Edit> tune delayed until better weather (fog and rain)

Edit> partial tune ready, had to stop due to failure of datalog

Edit> during the final programming an ex. valve dropped @8500...

 

what fuel u running?

 

im running e85

 

just install a new header and soon to the track to see if we can break in to the 11s