T3 60-1 .63 exhaust turbo's!!
Thread Starter
Honda-Tech Member
Joined: Jul 2009
Posts: 151
Likes: 0
T3 60-1 .63 exhaust turbo's!!
located in daly city, ca.
will ship anywhere
paypal accepted
please email -> JOHNJEFFREYH0@YAHOO.COM
*EMAIL GOES STRAIGHT TO MY PHONE!!*
ive got 2 of these turbo's, selling only whichever sells first.
both have -3 oil feed and -10 oil drain, turbonetics exhaust housing and garret compressor.
#1 the one on the left is from my old setup, rebuilt by blaast performance. ported exhaust housing and polished, ported inlet housing, 360 degree journal bearing upgrade and i only put 1000 miles on it since the rebuild. i made 310whp on a bone stock gsr. its currently clocked for a drag manifold, you will need to shave your block to fit this as the compressor housing is big you can see the difference with the "normal" 60-1 on the right. work alone was $380, selling for $375. i completely quarantee this turbo, if you have any problems i will return your money. i dont have receipts anymore, absuletly no shaft play!
#2 on the right is from a turbo kit i bought from a user here. previous owner said it covered 20,000 miles, i was guaranteed this did not smoke or leak. i just cleaned it up a bit. clocked for a spoolin manifold and will clear your block. $275 has super little shaft play, a thou or less!
will include downpipe that im selling on my other thread for free!!!
willing to trade for itr cams, axles, and 300+hp clutch and flywheel setup.
will ship anywhere
paypal accepted
please email -> JOHNJEFFREYH0@YAHOO.COM
*EMAIL GOES STRAIGHT TO MY PHONE!!*
ive got 2 of these turbo's, selling only whichever sells first.
both have -3 oil feed and -10 oil drain, turbonetics exhaust housing and garret compressor.
#1 the one on the left is from my old setup, rebuilt by blaast performance. ported exhaust housing and polished, ported inlet housing, 360 degree journal bearing upgrade and i only put 1000 miles on it since the rebuild. i made 310whp on a bone stock gsr. its currently clocked for a drag manifold, you will need to shave your block to fit this as the compressor housing is big you can see the difference with the "normal" 60-1 on the right. work alone was $380, selling for $375. i completely quarantee this turbo, if you have any problems i will return your money. i dont have receipts anymore, absuletly no shaft play!
#2 on the right is from a turbo kit i bought from a user here. previous owner said it covered 20,000 miles, i was guaranteed this did not smoke or leak. i just cleaned it up a bit. clocked for a spoolin manifold and will clear your block. $275 has super little shaft play, a thou or less!
will include downpipe that im selling on my other thread for free!!!
willing to trade for itr cams, axles, and 300+hp clutch and flywheel setup.
Last edited by blowBY EG6; Nov 5, 2009 at 10:12 PM.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jul 2009
Posts: 151
Likes: 0
Re: T3 60-1 .63 exhaust turbo's!!
buckNasty: i already picked up the headsstuds from you bro, was kinda hoping you still had the rods. thanks! if you have a clutch let me know.
b20vtech: how many miles on them? you have a clutch? thanks
b20vtech: how many miles on them? you have a clutch? thanks
Thread
Thread Starter
Forum
Replies
Last Post
