i have a 91 integra & my brake lights doesnt come on. here's the full story. everytime i place a 20 amp fuse in the horn/brake it burns and at the same time as im applying the brakes my car shuts off. and i notice a burning smell. HELP! any info would be appreciated.

 

You gotta short somewhere.... I would start at the taillights and see if a wire is bare then go from there.

 

^^well there's nothing wrong with the wiring & its new bulbs. im just wondering why the car keeps cutting off.

 

Obviously there is a wiring problem somewhere. Check your engine grounds and battery ground........

 

Bust out the factory service manual and check whatever goes to that fuse. You might also check above/around the brake pedal and see if anything is getting pushed on when you apply the brakes.

 

ok ill get to it in the am because its dark outside. ill let you guys know what's up.

 

disconnect your negative from your battery then put in the fuse