GA mild built and boosted 94 hatch 5k obo
have just finished it and it runs good has a surge issue sometimes not sure what it is..Don't really care to trade just need cash I have inheritad a car i have to ship or drive here so i need this 1 gonealso in order to make sure i have the funds for my laywer next yr The motor was built by another member on here and it has a rough tune on it right now.
contact:678-425-8009 im vic
location: atl ga
http://www.youtube.com/watch?v=3b0-MwXtl7Y
http://www.youtube.com/watch?v=4GecCtKUAKo
Motor is a d16z6 with a d16y8 intake manifold. It has je pistons, eagle rods, arp headstuds and rodbolts. It comes with rc750cc injectors, I just put in some ngk spark plugs heat range 7, and ngk blue spark plug wires. The trans is a ex/si transmission equipped a competition clutch stage 4 clutch w/ a resurfaced oem flywheel. Avid Solid motor mounts.
eibach springs and kyb struts.
here is the parts list for the car and motor.
http://www.cnc-motorsports.com/produ...86&CtgID=22165
$680
http://www.cnc-motorsports.com/produ...72&CtgID=16799
$80
http://www.cnc-motorsports.com/produ...21&CtgID=27704
$92
http://cgi.ebay.com/ebaymotors/COMPE...Q5fAccessories
$315
http://cgi.ebay.com/ebaymotors/RC-Fu...Q5fAccessories
$350
http://cgi.ebay.com/ebaymotors/AVID-...Q5fAccessories
$280
http://cgi.ebay.com/ebaymotors/PFAB-...ltDomainQ5f100
$300
and i got a rebuilt sc61 for $600
http://cgi.ebay.com/ebaymotors/GM-3-...Q5fAccessories
$80 the shopped charged me because it was on there dyno machin with they found out i needed 1 if i was gonna up the boost.
rims and tires $500
hid's $65
MBC $45
intercooler and piping $600 intercooler should support 750whp
and i have $400 in dyno time
Oh and hot tanked and got an 5 angle valve job on head.
$350
shop bill to have all of it put together and running $1200
So if u was to build my setup $5937
keep in mind this is just under the hood
shall i keep going
shell $1200 would be the final $7137
also my setup only has around 600 right now so its ready to get a final good tune
all this for $4300firm
contact:678-425-8009 im vic
location: atl ga
http://www.youtube.com/watch?v=3b0-MwXtl7Y
http://www.youtube.com/watch?v=4GecCtKUAKo
Motor is a d16z6 with a d16y8 intake manifold. It has je pistons, eagle rods, arp headstuds and rodbolts. It comes with rc750cc injectors, I just put in some ngk spark plugs heat range 7, and ngk blue spark plug wires. The trans is a ex/si transmission equipped a competition clutch stage 4 clutch w/ a resurfaced oem flywheel. Avid Solid motor mounts.
eibach springs and kyb struts.
here is the parts list for the car and motor.
http://www.cnc-motorsports.com/produ...86&CtgID=22165
$680
http://www.cnc-motorsports.com/produ...72&CtgID=16799
$80
http://www.cnc-motorsports.com/produ...21&CtgID=27704
$92
http://cgi.ebay.com/ebaymotors/COMPE...Q5fAccessories
$315
http://cgi.ebay.com/ebaymotors/RC-Fu...Q5fAccessories
$350
http://cgi.ebay.com/ebaymotors/AVID-...Q5fAccessories
$280
http://cgi.ebay.com/ebaymotors/PFAB-...ltDomainQ5f100
$300
and i got a rebuilt sc61 for $600
http://cgi.ebay.com/ebaymotors/GM-3-...Q5fAccessories
$80 the shopped charged me because it was on there dyno machin with they found out i needed 1 if i was gonna up the boost.
rims and tires $500
hid's $65
MBC $45
intercooler and piping $600 intercooler should support 750whp
and i have $400 in dyno time
Oh and hot tanked and got an 5 angle valve job on head.
$350
shop bill to have all of it put together and running $1200
So if u was to build my setup $5937
keep in mind this is just under the hood
shall i keep going
shell $1200 would be the final $7137
also my setup only has around 600 right now so its ready to get a final good tune
all this for $4300firm
Last edited by slows13; Nov 13, 2009 at 12:23 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
sir2sol
Honda Civic / Del Sol (1992 - 2000)
9
Sep 24, 2004 08:24 AM



