I am doing a h2b swap in my ej, anyway i just installed a skunk2 intake manifold, as we all know there's a sensor that has 2 hoses attached to it, on the stock manifold it goes near the throttle cable and on the skunk2 IM it goes on the back of the manifold. anyway now i don't know what hoses go were i got like 4 hoses and i don't know exactly were they go. i have 2 that go to the sensor that is now on the back of the IM and there's another 2 that go at the bottom of the throttle body and since i have also swap out my TB to a blox 68mm the positions of the hoses are a lil different too and the TB doesn't have that huge thing at the bottom like the stock one does. sorry for the long and confusing explanation, so does anyone have some pix or maybe someone with a similar setup using a aftermarket IM and TB that maybe could snap some pix, any help would be greatly appreciated...thanks

 

They are for coolant. You don't need them. Loop the 2 nipples on the thermostat housing.

Check the FAQ for coolant bypass, or google it.