Outlaw Race Turbo Question
Thread Starter
Honda-Tech Member
Joined: Sep 2009
Posts: 259
Likes: 0
From: NJ
Outlaw Race Turbo Question
Before I spend lots of $$$ on the Precision HP4272 they call it the outlaw turbo is it legal? They take a GT42 76MM turbo and cut down the inducer to 72MM and modified/make a new compressor cover so you end up with a 76MM turbo that meets the rules because it is 72MM at the leading edge but 76MM right behind the leading edge
Rules:
Limited to a maximum 72mm turbo, where the maximum compressor housing inducer diameter is 72.78mm, measured at the point where the leading edge of the compressor wheel meets the housing.
Rules:
Limited to a maximum 72mm turbo, where the maximum compressor housing inducer diameter is 72.78mm, measured at the point where the leading edge of the compressor wheel meets the housing.
Honda-Tech Member
Joined: Dec 2002
Posts: 3,251
Likes: 0
From: Old Bridge, N J
Re: Outlaw Race Turbo Question
Before I spend lots of $$$ on the Precision HP4272 they call it the outlaw turbo is it legal? They take a GT42 76MM turbo and cut down the inducer to 72MM and modified/make a new compressor cover so you end up with a 76MM turbo that meets the rules because it is 72MM at the leading edge but 76MM right behind the leading edge
Rules:
Limited to a maximum 72mm turbo, where the maximum compressor housing inducer diameter is 72.78mm, measured at the point where the leading edge of the compressor wheel meets the housing.
Rules:
Limited to a maximum 72mm turbo, where the maximum compressor housing inducer diameter is 72.78mm, measured at the point where the leading edge of the compressor wheel meets the housing.
Honda-Tech Member
Joined: Dec 2001
Posts: 12,822
Likes: 0
From: long island, ny, united states
Re: Outlaw Race Turbo Question
Before I spend lots of $$$ on the Precision HP4272 they call it the outlaw turbo is it legal? They take a GT42 76MM turbo and cut down the inducer to 72MM and modified/make a new compressor cover so you end up with a 76MM turbo that meets the rules because it is 72MM at the leading edge but 76MM right behind the leading edge
Rules:
Limited to a maximum 72mm turbo, where the maximum compressor housing inducer diameter is 72.78mm, measured at the point where the leading edge of the compressor wheel meets the housing.
Rules:
Limited to a maximum 72mm turbo, where the maximum compressor housing inducer diameter is 72.78mm, measured at the point where the leading edge of the compressor wheel meets the housing.
This is the same exact thing that turbo's direct does with all the 74mm stuff. Cut the wheel down to meet the rules.
Last edited by miller; Sep 8, 2009 at 06:26 AM. Reason: Added stuff
Honda-Tech Member
Joined: Dec 2002
Posts: 3,251
Likes: 0
From: Old Bridge, N J
Re: Outlaw Race Turbo Question
if you look at the rules they are pretty clear but i have stated before if there is a question or something that a competitor isnt sure about they should contact me thats all. if its an issue of where there is a question because the rules arent clear enough the posted rules would changed for everyone to see.
-Roger
-Roger
Good luck
Trending Topics
Honda-Tech Member
Joined: Dec 2001
Posts: 12,822
Likes: 0
From: long island, ny, united states
Re: Outlaw Race Turbo Question
There is no secret at all. These have been available to the public for a long time now. Felix has had one since last year also. I just sold one today and will have 2 more instock by the end of the week for anyone that wants one.
Bring that bullseye junk
Bring that bullseye junk
Honda-Tech Member
Joined: Nov 2001
Posts: 1,590
Likes: 0
From: SLC, utah, USA
Re: Outlaw Race Turbo Question
Honda-Tech Member
Joined: Dec 2001
Posts: 12,822
Likes: 0
From: long island, ny, united states
Re: Outlaw Race Turbo Question
I am bringing a box of fruit roll ups, for everyone to suck on when they are crying after I go a .6x at 175 
We shall see Brian, we shall see.
We shall see Brian, we shall see.
Honda-Tech Member
Joined: Oct 2004
Posts: 1,611
Likes: 0
From: south jerz
Thread
Thread Starter
Forum
Replies
Last Post
Radyjr
Forced Induction
3
Sep 19, 2006 05:45 PM
