ok i just wanna ,ake sure of some stuff before i go ripping my car apart, my vafc got stolen outta my car the other day, but the jerkoffs didnt unwire it, they ripped it outta place and the wires are still connected to my ecu, when i tried to start the car the car bogged and stalled out and a bucnh of white smoke came out of my exhaust, if i unwire the vafc from the ecu will this fix the problem? the vafc was never tned it was allways set at stcok setting.

any help would be appreciated guys. thanks
eddie

 

just connect back the map sensor wires, join them back together since the vafc stood in between them ...

greg

 

and this will fix my problem??

 

on the instructions it doesnt show a map sensor wire, it just shows these wires getting spliced: vtec solenoid signal,pressure signal,

 

the pressure signal is the map, the vtec are also cut, so you need to reconnect those and your set

 

hook the yellow and white wires on the VAFC harness together as a temporary connection until you return it to stock or get another VAFC.