Injector Dynamics ID2000 injectors are here!!
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 15,814
Likes: 8
From: Dallas, TX, USA
Injector Dynamics ID2000 injectors are here!!
Finally, a great solution for people that need more than 1500cc/min!!
The new Injector Dynamics ID2000 flows 2200cc/min at 3 bar (43.5psi) and is high impedance.That means no injector resistor or injector driver is needed.With the capability of running up to 130psi and flowing 3700cc/min, the needs for running multiple injectors per cylinder are gone on all but the most demanding methanol applications. Each injector includes the necessary adaptor top and electrical connector.The adaptor tops mechanically lock to the injector and also incorporate a 7 micron replaceable filter.
With the most linear flow in it’s class, great atomization and full injector dead time information provided, there really is no competition for the ID2000.Check out this video to see how well they run in a worst case scenario, a bone stock 120hp car!
To order click on the link http://www.t1raceparts.com/product_p/id%202000.htm
Visit http://www.injectordynamics.com/ID2000.html for more information.
Honda-Tech Member
Joined: Mar 2002
Posts: 6,295
Likes: 0
From: 106 and Park
Trending Topics
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 15,814
Likes: 8
From: Dallas, TX, USA
Re: Injector Dynamics ID2000 injectors are here!!
These are not compatible with Q16 or VP Import. There is a chemical in those fuels that restricts flow with the ID2000. We recommend VP C16 or C23 fuel for the ID2000's. I'm running the 2000's with C23 on my car.
Honda-Tech Member
Joined: Jul 2006
Posts: 570
Likes: 0
From: Manama, Bahrain, Bahrain
Re: Injector Dynamics ID2000 injectors are here!!
I am using right now ID1000 with twin walbro intank, i set the base pressure at 50psi and i max them out at 715whp.
since i cant increase the base pressure any more with the walbro, do you think the ID2000 will be good for me or i have to change the pumps to twin bosch and increase the base to 100psi?
now i am looking for 800+ whp.
since i cant increase the base pressure any more with the walbro, do you think the ID2000 will be good for me or i have to change the pumps to twin bosch and increase the base to 100psi?
now i am looking for 800+ whp.
Joined: Dec 2001
Posts: 9,091
Likes: 28
From: the internet and I WILL STEP ON YOU
Honda-Tech Member
Joined: Dec 2005
Posts: 3,360
Likes: 1
From: Ohio
Re: Injector Dynamics ID2000 injectors are here!!
I wasn't being a dick ****face. I was simply stating that 1000bucks for a set of injectors is insane. I have actually bought parts off Tony in the past so blow me.
OP GLWS!
OP GLWS!
Honda-Tech Member
Joined: Dec 2008
Posts: 20
Likes: 0
From: Redding, CA
Re: Injector Dynamics ID2000 injectors are here!!
man, to bad i didnt wait a few months more i would of purchased these instead of the id1000's. the id1000s work bitchin btw...
can you use meth or eth with these injectors? also, i dont use vp fuels but f&l .. do you know what the chemical is that messes up the injectors is/
do you have a flow chart like you do with the id1000's
ty
dean
can you use meth or eth with these injectors? also, i dont use vp fuels but f&l .. do you know what the chemical is that messes up the injectors is/
do you have a flow chart like you do with the id1000's
ty
dean
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 15,814
Likes: 8
From: Dallas, TX, USA
Re: Injector Dynamics ID2000 injectors are here!!
These are compatible with Methanol and Ethanol. Oxygenated fuels or those with MTBE are the ones to watch for that are not compatbile.
There is a flow chart on the ID website.
There is a flow chart on the ID website.
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 15,814
Likes: 8
From: Dallas, TX, USA
Re: Injector Dynamics ID2000 injectors are here!!
It's not likely that you'll need to run high pressure with these injectors. I'm making over 1000whp running 45psi base fuel pressure and i'm barely over 80% duty cycle.
You can use them with the S300.
You can use them with the S300.
Thread
Thread Starter
Forum
Replies
Last Post
