no pressure to 1 brake.
Thread Starter
Honda-Tech Member
Joined: Aug 2009
Posts: 32
Likes: 0
From: washington, garage mostly
no pressure to 1 brake.
94 civic coupe.
baer big brakes.
i put a 4040 prop valve in when and upgraded to baer big brakes all the way around. now i can bleed the front 2 and the drivers rear but not the passenger rear. no pressure at all to that line. i took the line off at the prop valve and no pressure or fluid comes out. when i loosen any of the other brake lines i get great pressure and lots of fluid. could this be a bad prop valve. i did buy it on ebay. master and booster are gsr and new. thank you for any suggestions or advise.
baer big brakes.
i put a 4040 prop valve in when and upgraded to baer big brakes all the way around. now i can bleed the front 2 and the drivers rear but not the passenger rear. no pressure at all to that line. i took the line off at the prop valve and no pressure or fluid comes out. when i loosen any of the other brake lines i get great pressure and lots of fluid. could this be a bad prop valve. i did buy it on ebay. master and booster are gsr and new. thank you for any suggestions or advise.
Thread
Thread Starter
Forum
Replies
Last Post
nicky352
Honda Civic / Del Sol (1992 - 2000)
19
Mar 27, 2023 08:56 PM
meallout
Tech / Misc
7
Jul 31, 2008 05:41 AM
