Audio / Security / Video Sound Systems, Alarms, Electronics
Sponsored by:
Sponsored by:

Pansonic head unit removal

Thread Tools
 
Search this Thread
 
Old Aug 26, 2009 | 10:48 AM
  #1  
chb93's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2009
Posts: 133
Likes: 0
From: New Jersey
Default Pansonic head unit removal

Recently a friend of mine decided to upgrade his sound system and gave his old stuff to me. I had a system in my last car and had it installed by a friend of mine who is currently away at school. Ive been talking to him and he has walked me through the whole wiring process to the amp and the speaker and how to run the wires through the car, but when it came time to remove my head unit I ran into trouble. I have never removed a head unit before and dont know where to start. The head unit is a Panasonic dp940. All I have to plug in is the wire from the amp to the head unit with the plugs (the input I believe) and a small blue wire my friend refered to as the REM. He was also not sure on where that wire should go without seeing it in person. Any help would be greatly appriciated with the removal of the head unit or the REM wire. This stupd head unit and 2 wires are holding me back from getting my system up and running and I dont want to have to pay best buy 100 bucks to figure it out for me. Thanks in advance.
Reply
Old Aug 26, 2009 | 12:09 PM
  #2  
XstreamRocker's Avatar
Honda-Tech Member
 
Joined: Jun 2009
Posts: 116
Likes: 0
From: Delight, AR
Default Re: Pansonic head unit removal

If I knew what kind of car you were driving, I could help you. We can't help you without knowing everything you do. The actual HU removal process is different with every car as it requires the removal of a few dashboard parts. With knowing the make, model, and year of your car, we can't help you.
Reply
Old Aug 26, 2009 | 01:36 PM
  #3  
chb93's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2009
Posts: 133
Likes: 0
From: New Jersey
Default Re: Pansonic head unit removal

Sorry its a 93 civic hatchback
Reply
Old Aug 26, 2009 | 04:13 PM
  #4  
XstreamRocker's Avatar
Honda-Tech Member
 
Joined: Jun 2009
Posts: 116
Likes: 0
From: Delight, AR
Default Re: Pansonic head unit removal

Ok. It appears that your car uses a mounting sleeve to hold the aftermarket HU. To remove the HU, you will need the removal straps that came with it. If you don't have them, it's quite possible that your friend at school has them. Either way that's how it's done. The exact process that was used to install it is a little complicated to explain but I can give you a link here:

http://www.installdr.com/InstallDocs...PDF/466017.pdf

This is a PDF that you should be able to print and will show you what I'm talking about.
Reply
Old Aug 27, 2009 | 09:21 AM
  #5  
chb93's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2009
Posts: 133
Likes: 0
From: New Jersey
Default Re: Pansonic head unit removal

The car had the head unit in it when I bought it so I dont ahve the straps. im going to give my friend a call and see if he has them. Thanks for the help
Reply
Old Aug 31, 2009 | 02:28 PM
  #6  
D23_Si's Avatar
Trial User
 
Joined: Mar 2009
Posts: 1
Likes: 0
From: Charleston, WV
Default Re: Pansonic head unit removal

very helpful website....www.installdr.com...thanks!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
alphalanos
Honda S2000
3
Mar 1, 2013 01:46 PM
Black Diamond
Audio / Security / Video
8
Nov 6, 2009 06:12 AM
Crossbreeder
Audio / Security / Video
8
Sep 30, 2009 09:55 AM
funtak
Audio / Security / Video
1
May 15, 2007 10:13 AM
CrazyModGSR
Audio / Security / Video
8
Aug 25, 2004 06:10 PM




All times are GMT -8. The time now is 01:33 AM.