power steering rack in a non-ps car
Thread Starter
Honda-Tech Member
Joined: Apr 2002
Posts: 664
Likes: 0
From: all your base are belong to us, usa
i have a 95 dx, and have to turn the wheel like 20 times to get lock to lock. is anyone using a ps rack from a civic si or an integra, but not using ps?
i just want to know if its going to be too hard to turn.
thanks
i just want to know if its going to be too hard to turn.
thanks
I just did this with my PS rack:
https://honda-tech.com/zerothread?id=184202&page=1
Only cost me $5.00 at Home Depot for the parts and i used an old clutch slave cylinder resevoir for the breather. Check it out...
https://honda-tech.com/zerothread?id=184202&page=1
Only cost me $5.00 at Home Depot for the parts and i used an old clutch slave cylinder resevoir for the breather. Check it out...
Got any pics JV? I would like to see this setup, I have read thru the article on how to do it and i would like to try this on my Civic...also with a DX steering rack... I plan on getting an ITR/GSR rack to replace it soon enough...
Thread
Thread Starter
Forum
Replies
Last Post
Battle Monkey
Road Racing / Autocross & Time Attack
5
Aug 5, 2016 03:14 AM
fsp31
Road Racing / Autocross & Time Attack
18
Apr 29, 2003 05:10 PM






