550cc injectors works like 350cc
Thread Starter
Honda-Tech Member
Joined: May 2006
Posts: 125
Likes: 0
From: Lafayette, LA
550cc injectors works like 350cc
Hello!
I have just finished my project.. boosted D16Z6 (vitaras, eagles etc....) I will post some pics and some info soon.
But I have a little problem with my injectors.
I have put RC 550cc into it, but car wont start. I seen on wideband that it is too lean, so I changed the injector size in Crome to 450 and it was better, but still lean. At the finish, I have seet 350cc as a new size of the injectors and it works good.
Now I am dealing with problem that the injectors is good only to some 10 PSI and then the duty cycle is more than 100%.
Whats wrong or what can I do? Rise a fuel pressure?
The fuel pump and the fuel regulator is stock.
I have just finished my project.. boosted D16Z6 (vitaras, eagles etc....) I will post some pics and some info soon.
But I have a little problem with my injectors.
I have put RC 550cc into it, but car wont start. I seen on wideband that it is too lean, so I changed the injector size in Crome to 450 and it was better, but still lean. At the finish, I have seet 350cc as a new size of the injectors and it works good.
Now I am dealing with problem that the injectors is good only to some 10 PSI and then the duty cycle is more than 100%.
Whats wrong or what can I do? Rise a fuel pressure?
The fuel pump and the fuel regulator is stock.
Thread
Thread Starter
Forum
Replies
Last Post
beenba
Tech / Misc
11
May 2, 2014 12:41 PM
