So the ISB exploded in my D16 tranny. The inner race is in about 30 peices and the ball bearings fell out on the floor when I removed the gear set assembly. Usually I could drive out the bearing from the clutch side. But like I said only the OUTER race is left. Coming in from the clucth side is useless cause there is nothing to push against.
Anyone had any luck getting the bearing out with no inner race or ball bearings left Idea's would be GREAT!!

Nick

 

Cut it out. Clutch housing is likely toast so you might want to just find another housing or trans.

 

3 jaw puller, just saw a pic somewhere on how it was done.