about to order valves and just seeing if there is any good ones that i havent seen.
running a DART block, supertech 9.5:1 pistons, gsr crank. also gsr head with crower springs and retainers.
thanks for any input.

 

Ferrea, Supertech and oem honda are all great valves.

 

I've used Supertech and OEM valves with great success.

 

Supertech are going to be the most "cost effective". Ferrea are the best valves that we have seen for Honda engines. We have used both with no issues.

 

I will not use anything but Ferrea. Money well spent. I've been over 12,800RPM a few times and havent had an issue. Now that is hard to beat.

 

Chuck from Alternative Motorsports uses Ferrea valves on his 8 sec honda..

 

anyone use skunk2 valves? i bought some off evans tuning and now i'm starting to get worried cause it seems not many people use them.

 

I'm about to get some skunk2 valves as well so anyone using them I would like to know your opinion as well.

 

FERREA all the way. I have seen TOO many supertech valves drop and ruin the motors.

Adriano

 

skunk 2 valves are good. I have a friend reving his to 9000-9500 with no problems. On my personal car I'm running supertech valves. It's actually supertech valvetrain. I've had the car 3 years....and reving any where from 9000 rpms to 10500rpms. Still running strong. Taken the car to the track, road racing and everything. On my girls car we have Ferrea...we wanted to try something different and have success also and she revs the car to 10k with success. So I say both Ferrea and Supertech are good products.

 

I ran skunk2 valves with no issues.....anyone try omni valves?

 

FERREA MONEY WELL SPENT

 

poor machine work will cause any valve to fail. ferreas QC has went down in the past couple years. we run supertech in all our heads

 

i forgot i run ferrea valves in my motor, lol.. i had a n/a gsr revving to 9000-9500. no problems

 

running omni here,

 

Supertech here, no issues.. 3 years and counting @ 500whp