I have a top mount w/ backdoor EVO IX intercooler, and my intake temps are up to 100*F cruising and 120*F sitting at full temp. This is during Florida summer heat, so I was just wondering what kind of intake temps do you guys see, what type of cooling setup and what temp is it outside??

for simplicity, you can use this format:

Florida summer temp: 94 *F
IAT: 100-120 *F
setup: topmount w/ backdoor EVO IX intercooler

 

My hot side (backdoor entrance) is pretty close to my manifold, so I might end up going back to a regular inlet intercooler so I can route the pipes away from the heat.

 

112*F is the highest it gets and that's at the end of a 1-2-3 pull...

Socal Summer Temp: 100-115 *F
IAT: 100-112 *F
Setup: Ramhorn with GT30R with Apexi GT spec intercooler 11" tall 3" wide. AEM IAT sensor mounted on chargepipe running AEM EMS.

 

Knowing where you locate the IAT will help too.

 

good point, added