Sleeved B18..JE..Other stuff
Thread Starter
Honda-Tech Member
Joined: Dec 2004
Posts: 1,037
Likes: 0
From: Daa bears, il, USA
Sleeved B18..JE..Other stuff
I can get more pics of everything if you email me... blk99dc2r@yahoo.com.... i havent picked up the sleeved block from the machine shop yet but will later today and will post those pics up tongiht, but the pics of the block that are on there of when it was assembled still. email for fast response.
i will trade anything or something plus cash for:
70mm+ TB
Aftermarket Intake Manifold
Bigger injectors
DC2 98+ front end parts
The block is a b18a1 with old skool benson sleeves, just got back from the machine shop where the back of the block was welded where a fitting broke. everything was checked out its ready for a 81.5mm hone due to some scorching but is honeable. ---$500obo
9.7:1comp JE pistons used for break in only still MINT, 81.5mm--$250
C&R radiator for a Dc, no fan----$175
RC High impednce 750cc injectors---$280
PP 68mm TB--$75
Ported b16 intake mani, for 68mm TB---$80
Fresh rebuilt 0 miles 14b turbo off a 93 talon(Smaller Turbo)----$125
RC autoworks Log mani---$125
Mint DSM 450 Injectors----$40
Stock B16 intake mani---$20
Stock Gsr intake mani---$20
Bare B18b Block with mains caps no crank----50
Stock GSR throttle Body---$15
Stock D15 TB-----$10
Type R Badge from Honda In Wrapper----$30
B18A Oil Pan---$15
Crushed but brand new AEM 3 inch filter----$20
Cometic 3 layer HG for ap1 s2000 F20c----$65
Nappa 3 Layer f20c HG-----$30
Sorta-Fit Passenger side Fender Painted Green 96-01 civic coupe--$30
Custom Side Exit Exhaust with Dump for T3----$50
PIcs:
i will trade anything or something plus cash for:
70mm+ TB
Aftermarket Intake Manifold
Bigger injectors
DC2 98+ front end parts
The block is a b18a1 with old skool benson sleeves, just got back from the machine shop where the back of the block was welded where a fitting broke. everything was checked out its ready for a 81.5mm hone due to some scorching but is honeable. ---$500obo
9.7:1comp JE pistons used for break in only still MINT, 81.5mm--$250
C&R radiator for a Dc, no fan----$175
RC High impednce 750cc injectors---$280
PP 68mm TB--$75
Ported b16 intake mani, for 68mm TB---$80
Fresh rebuilt 0 miles 14b turbo off a 93 talon(Smaller Turbo)----$125
RC autoworks Log mani---$125
Mint DSM 450 Injectors----$40
Stock B16 intake mani---$20
Stock Gsr intake mani---$20
Bare B18b Block with mains caps no crank----50
Stock GSR throttle Body---$15
Stock D15 TB-----$10
Type R Badge from Honda In Wrapper----$30
B18A Oil Pan---$15
Crushed but brand new AEM 3 inch filter----$20
Cometic 3 layer HG for ap1 s2000 F20c----$65
Nappa 3 Layer f20c HG-----$30
Sorta-Fit Passenger side Fender Painted Green 96-01 civic coupe--$30
Custom Side Exit Exhaust with Dump for T3----$50
PIcs:
Last edited by 91whiteZCrex; Apr 4, 2009 at 06:18 AM.
i need to get my new setup going plz help 
Thread Starter
Honda-Tech Member
Joined: Dec 2004
Posts: 1,037
Likes: 0
From: Daa bears, il, USA
Re: Sleeved B18..JE..Other stuff
The sleeved block comes with mains and crank, the non sleeved
One just come with the crank, I just picked up the sleeved block from the machine shop with the 81.5mm be pistons I will post pics of both shortly
One just come with the crank, I just picked up the sleeved block from the machine shop with the 81.5mm be pistons I will post pics of both shortly
Trending Topics
Honda-Tech Member
Joined: Mar 2008
Posts: 40
Likes: 0
From: st.louis, mo, u.s
Re: Sleeved B18..JE..Other stuff
on the side note what's this missing part? did the block fall or something?
http://i108.photobucket.com/albums/n...9blkdc2054.jpg
Last edited by mehrshadvr4; May 6, 2009 at 07:40 PM.
Thread
Thread Starter
Forum
Replies
Last Post
carbon fiber coupe
Classifieds: Forced Induction
9
Sep 26, 2011 01:56 PM
punkracer
Forced Induction
26
Sep 21, 2010 08:26 AM
g2turbo
Forced Induction
42
Sep 12, 2003 12:30 PM
